 FS: If you guys want these?, Strut Braces for Front and Rear |
 Mar 1, 2004 - 5:04 PM
|
 
|
 Enthusiast  Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%)  |
Ok guys,
this is what has been going on. A few of you guys have been asking me to make some things (especially "strut bars"). Well, I think i have a plan? I would like to know how many people would deffinetly be in for me making a bounch of these! I have made a rear strut bar "as a prototype" (look on my profile for pics) and since it turned out really well, I am willing to make some of these for other 6gc members! The bars will fit both the GT and ST since body types are the same. I have not yet made a front bar yet, but i am sure i can... since it should be similar but would just use more material and cost a little more. I will be making a front bar in the next few days and it will be a "3 point brace" like the really expensive ones that cost over $300. Depending on the amount of people that are serious about this.... the price will drop for the more people that want these braces! Prices will be: front bar price will be $130 including shipping rear brace will be $100 including shipping only people that have $ and are serious should reply to this post!!!! This is for all you guys who want "good solid strut braces" but dont want to spend tons of $ on them! DG --------------------  |
 |
Replies
|
Mar 2, 2004 - 8:05 PM
|
|
 Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
Wow
|
Posts in this topic
DG_Performance FS: If you guys want these? Mar 1, 2004 - 5:04 PM
jdm94gt Hows it goin man?
Is there any possibililty of pro... Mar 1, 2004 - 5:13 PM DG_Performance matt,
i just looked at the rear jspeed 3point brac... Mar 1, 2004 - 5:19 PM orvillescelica i would definatly be interested in a 3 pt front st... Mar 1, 2004 - 5:25 PM BigEdge169 I'm the same as Orville, I'm very interest... Mar 1, 2004 - 5:34 PM Hym3n I'm a moron, but I've got a question. What... Mar 1, 2004 - 6:31 PM Sev408 i would take a front strut brace when you get them... Mar 1, 2004 - 7:17 PM kamax once you get a prototype of the front brace. I wi... Mar 1, 2004 - 8:24 PM LatinKraze I'm down with a purchase of both.
Some one g... Mar 1, 2004 - 8:27 PM FastLane95GT i'd probably be in, just would like some pictu... Mar 1, 2004 - 8:46 PM DG_Performance I will put pics of the front brace on my profile w... Mar 1, 2004 - 11:32 PM Jabberwock Dude, you know I am in since I have been bugging y... Mar 2, 2004 - 1:54 AM Raek yup...i'm in. Mar 2, 2004 - 8:24 AM subsolo_21 If ur still making the front braces this summer I... Mar 2, 2004 - 1:12 PM abatardi OH HELL YES.
Would like to see pictures of the ... Mar 2, 2004 - 6:31 PM RedSunCelica I am in for both front and rear.
PM or email me wh... Mar 2, 2004 - 6:46 PM DG_Performance I have the jig made and ready to go for making the... Mar 2, 2004 - 7:41 PM yep I'd be interested once you figure it all out. Mar 2, 2004 - 7:51 PM ghostdog I'd be down for a 2-point bar, provided of cou... Mar 2, 2004 - 7:54 PM PhillyGuy086 doesn't the 3 point rear brace bolt onto the m... Mar 2, 2004 - 9:46 PM FallenHero I'll have to see pics, but I'd be down for... Mar 2, 2004 - 11:37 PM Exile04 hey i would be down. first tho is a 3point front c... Mar 3, 2004 - 12:30 AM 94silverst I'm in for the front! Mar 3, 2004 - 12:50 PM CJOHNST3 I'd be in for the fronts Mar 3, 2004 - 9:44 PM aaronc222 QUOTE (DG_Performance @ Mar 1, 2004 - 3:19 PM) mat... Mar 3, 2004 - 10:30 PM DG_Performance ok well if that is where it mounts i can fab somet... Mar 4, 2004 - 7:51 AM aaronc222 Given a price to work for, I can have the money in... Mar 4, 2004 - 3:13 PM DG_Performance Ok, when you are ready to get one just let me know... Mar 4, 2004 - 4:01 PM FallenHero How about my custom front bar??? Mar 4, 2004 - 11:50 PM DG_Performance what is custom about the front bar that you want??... Mar 5, 2004 - 7:59 AM FallenHero Well, I have an aftermarket cruise set up on my ca... Mar 5, 2004 - 12:00 PM DG_Performance ok guys,
fabrication on the front braces has start... Mar 5, 2004 - 3:51 PM BigEdge169 I'd be in for a 3 point front.
I sent you a P... Mar 5, 2004 - 5:37 PM DG_Performance Ok guys, have a look!
the first prototype 3 po... Mar 6, 2004 - 6:18 PM orvillescelica Nice work DG!! it looks great! I was w... Mar 6, 2004 - 11:50 PM DG_Performance well,
the braces are hollow to save on weight, bu... Mar 7, 2004 - 2:43 AM DG_Performance ok, well i got the (fixture/jig) ready to go so i ... Mar 7, 2004 - 5:57 PM CJOHNST3 What is the cost? Mar 7, 2004 - 6:50 PM BigEdge169 QUOTE (DG_Performance @ Mar 1, 2004 - 4:04 PM) Pri... Mar 8, 2004 - 8:47 AM abatardi eh, crap. I just looked at the design and there... Mar 8, 2004 - 12:15 PM DG_Performance Look for a modified bar in a little while..... I a... Mar 8, 2004 - 2:20 PM Raek sent my money...
am i the first? Mar 9, 2004 - 1:20 PM DG_Performance Got the $......
Will ship out the brace tomor... Mar 9, 2004 - 6:40 PM DG_Performance Updates: The 3 point brace will not fit the ST... Mar 12, 2004 - 2:13 PM CDNSLEEKA These braces look great will be a great addition t... Mar 14, 2004 - 8:37 PM DG_Performance I do have a jig made and can make them any time. ... Mar 17, 2004 - 9:31 AM doGGy RE: FS: If you guys want these? Mar 17, 2004 - 9:34 AM Raek i got mine yesterday, but it's waaaaay too sno... Mar 18, 2004 - 8:03 AM DG_Performance you are welcome raek!!!
thank you... Mar 19, 2004 - 2:57 PM Supersprynt cough, stuff for coupes, cough. Mar 19, 2004 - 3:01 PM orvillescelica I dont see why the front braces wouldnt fit the co... Mar 19, 2004 - 6:50 PM ghostdog QUOTE (orvillescelica @ Mar 19, 2004 - 6:50 PM) I ... Mar 19, 2004 - 6:59 PM DG_Performance i thought i mentioned b4 that the front of the car... Mar 19, 2004 - 8:13 PM XXX_Mina I have a celica ST with a 3sgte... how is it that ... Mar 20, 2004 - 3:08 AM DG_Performance I am goint to see if i can come up with a special ... Mar 26, 2004 - 1:40 PM DG_Performance Hey guys!
I got a Rear Strut bar (normal thick... Apr 10, 2004 - 12:48 PM Cormudgen QUOTE (DG_Performance @ Apr 10, 2004 - 10:48 AM) H... Apr 10, 2004 - 1:56 PM Cormudgen QUOTE (DG_Performance @ Apr 10, 2004 - 10:48 AM) H... Apr 10, 2004 - 1:58 PM Akuza hey whats the front strut bar in the wheel well fo... Apr 10, 2004 - 5:16 PM jgreening QUOTE Look for a modified bar in a little while...... May 1, 2004 - 1:21 AM DG_Performance Cormudgen, I just noticed you are interested in t... May 2, 2004 - 9:04 AM Jeremy1210 About your side tower bar, how hard in the install... May 2, 2004 - 12:08 PM DG_Performance I would recomend that you just take the fenders of... May 2, 2004 - 9:58 PM celicarocker the fenders are easy to take off guys, i did it...... May 2, 2004 - 10:11 PM
shid BUMP! this needed to be bumped before it got l... Oct 13, 2004 - 10:17 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 14th, 2025 - 1:57 PM |