FS: JDM Power Folding Mirrors Options

[ricochet1490]

I have for sale a set of JDM power folding mirrors. I ordered these from holland and they came with my RHD door harnesses I needed. I had them on my car for a couple of weeks (never drove it) but didn't want to run a custom harness to the Relay (trying to keep the wiring OEM). I instead bought the 5 wire type of mirror.

So what I have are two mirrors in silver that come with the OEM door harness plugs. They fold in and out, that was tested. I have the relay and the pigtail for that relay. There is also a switch and a pigtail that will work for this application. It was a USDM pigtail that I added the wires to. It fits into the JDM switch for this type of power fold mirror.

The only disclaimer is that when I hooked everything up, I couldn't get this switch to operate the basic mirror controls (left right up down). When I plugged in a USDM mirror switch to test, the mirrors moved as they should. There is a good chance the switch doesn't work, but I never took it apart to check the contacts or anything for corrosion.

Replacement switch that is needed for these mirrors can be found here in case they don't work:
http://www.ebay.com/itm/Celica-ST205-ST202...3ce&vxp=mtr

Looking to get $100 shipped. This is at LEAST %40 cheaper than similar sets on ebay. But will entertain reasonable offers because of the switch and that potential cost.

Cool mod for the car. Especially if you live on a college campus or other congested area where side mirrors have tendency to get snapped off by pedestrians who are hammered. You can just fold em on in.




video of sample folding (not these mirrors, but what you can expect WRT function.


This post has been edited by ricochet1490: May 12, 2013 - 3:31 PM

[ricochet1490]

To the top ........