Limited edition side skirts for 6th gen, Limited edition side skirts for 6th gen Options

[NEVERSTOP]

I am going to produce a limited edition fiberglass side skirt for the 6th gen Celica.
It will be based off of the veilside/vis invader side skirt, but will have a air intake molded into the rear of it that will have the option of forcing air into the rear wheel well, thus cooling the rear brakes by cirrculating more air in the wheel well. The side skirts will come a with mesh grill insert that can be changed to match any other grills you may have. There will be a few other minor changes added.
These side skirts will be molded for a perfect fit... unlike the vis side skirt that need alot of modifications to fit correctly

Info:

Estimated cost: $350-400 for the set.
5 layer molded fiberglass.
Preped and primered.
Molded mounting brakets for mesh grill.
Mesh grill is included.
Tubing for funcional side skirts only.
Diagrams for cutting to fit tubing.
Hardware for mounting.
Approx weight: 5lbs each

Prototype designs will be availble soon.

These side skirts will be a limited edition only, I am planning on making ten sets and possibly more depending on demand.

I will NOT ship two sets within 300 mile of each other... That way they will be as close to one of a kind as possible. This way you won't drive down the street and see another Celica with these sideskirts.

I am also planning on developing a front and rear air dam for the 6th gen. I want to see how well the side skirts go over before I produce the front and rear.

I would like to have at least 10 sets preordered before I start to produce them. I do not need the cash up front. Money will be collected prior to shipping.

If you have questions or comments regarding this you can contact me via email.


Thanks
Neverstop
XNEVERSTOPX@aol.com

[NEVERSTOP]

Okay so I drew a new concept design based on the comment about the air vents the Supra has.... This is once again just a concept and will not be excatly what the finished product looks like.

I am still alittle sceptical about haveing the piece come back onto the door like it is drawn in the concept... this would be really hard for this to hold up over time and am giving some thought to changing the desing slightly to eleminate this.


Also with this design you would be required to cut into rear clip of your car to make the side skirts funcional... this would be a permanet mod to your car and would be really hard to fix... I am thinking about making the side skirts a two piece design that would give you the option of just leaving the body of the car alone or making the piece funcitonal.... this would require a body shop to make the modifications even though I would include a detailed how-to I still would suggest haveing a shop do this..

Also if I make the two piece design expect the cost to go up a little but will still try to keep it within the $200-$300 range for the set.

Newayz here is the design

Concept design 2


Please feel free to make suggestions on this design

Thanks
Neverstop