3SFTE project Options

[digs]

Hi guys, don't post on here really as post on a UK celica forum.... but thought I would share what I have done to my SSI.

Following the various 5sfte posts and guidance, I have now turbo'd my 3sfe engine, some pics of the engine bay (its had a little more done since this one - including changing boost gauge t-off point to the map sensor line) and other bits at end of post.

Have installed;

3sge injectors
ct26 turbo
emanage blue (getting tuned in a couple of weeks)
ST185 manifold
ST185 map sensor
2.25" intercooler pipes and intercooler
Apexi BOV
ST185 pan
boost and oil gauges
2.5" custom ss exhaust

Been a fun and frustrating build, the turbo would not clear the coolant hard lines on the rev 3 3sfe, so I had to source a spacer for between the manifold and turbo. Changing the oil pan is fun too! Didn't need to relocate oil filter, so that was a bit easier. Coolant lines off the throttle body so again pretty easy.

Intercooler piping was interesting, right side through air pox route, left side was a bit of a squueze! But did not need ot remove a/c or anything else.

Not driven it on boost yet, but has been driven for several hours off boost, and doesn't miss a beat. Injector size has gone from 215cc (rev 3 3sfe stock I believe) to 295 (3sge stock), running on stock fuel pump, so some scope to improve there.

First map though is just a safe one to ensure no det, etc. Plans next will be;

wideband sensor and gauge (hooked into emanate)
prob bigger injectors and fuel pump
sort out second output for boost gauge from throttle bottle to leave map sensor feed unmolested
Wilwood 4 pot brakes

looking forward to running boost!






This post has been edited by digs: May 20, 2013 - 1:56 PM

[Smaay]

all 2ZZ injectors are High Impedance. but they are not that big. the RX7 injectors fit perfectly in my 5S-FE and the plug was the same. the 2ZZ is a different style plug so you will need pigtails. no need to re-invent the wheel. stick with what works

i suggest NA Supra MKIII http://www.lextreme.com/7mge.html

This post has been edited by Smaay: May 21, 2013 - 8:21 AM

[Syaoran]

all 2ZZ injectors are High Impedance. but they are not that big. the RX7 injectors fit perfectly in my 5S-FE and the plug was the same. the 2ZZ is a different style plug so you will need pigtails. no need to re-invent the wheel. stick with what works

i suggest NA Supra MKIII injectors or lexus 1UZ injectors.

The RX-7 Turbo-II are NOT the same plugs. The Lotus Exige with the 2zz supercharged comes with 440cc injectors and the plugs are the same as the 1zz and 2zz, which are the same as the 5S-FE.

[Smaay]

all 2ZZ injectors are High Impedance. but they are not that big. the RX7 injectors fit perfectly in my 5S-FE and the plug was the same. the 2ZZ is a different style plug so you will need pigtails. no need to re-invent the wheel. stick with what works

i suggest NA Supra MKIII injectors or lexus 1UZ injectors.

The RX-7 Turbo-II are NOT the same plugs. The Lotus Exige with the 2zz supercharged comes with 440cc injectors and the plugs are the same as the 1zz and 2zz, which are the same as the 5S-FE.

im not talking about the turbo RX7 and 1ZZ and 2ZZ injectors are NOT NOT NOT the same plug as the 5S-FE. ill say it again NOT!

[95CelicaST]

all 2ZZ injectors are High Impedance. but they are not that big. the RX7 injectors fit perfectly in my 5S-FE and the plug was the same. the 2ZZ is a different style plug so you will need pigtails. no need to re-invent the wheel. stick with what works

i suggest NA Supra MKIII injectors or lexus 1UZ injectors.

The RX-7 Turbo-II are NOT the same plugs. The Lotus Exige with the 2zz supercharged comes with 440cc injectors and the plugs are the same as the 1zz and 2zz, which are the same as the 5S-FE.

im not talking about the turbo RX7 and 1ZZ and 2ZZ injectors are NOT NOT NOT the same plug as the 5S-FE. ill say it again NOT!

Would you say that 1ZZ and 2ZZ injectors are the same plug as the 5SFE? Or no?