Info on mods needed Options

[Sxrman]

Hey all I'm new to the site n I Owen a sx-r n i wanna increase the performance of my car anyone have any info on mods that will help me including compatible motors

[Timmyface]

As posted before, have a GOOOOOOOD read through all them stickies that were linked above.
Yes there are multiple engines (somewhat) readily available to us in australia.
3SGE
3SGE - Beams
3SGTE - but you dont want turbo
Or a V6 Swap.

Mind you, a Beams and 3sgte will give you the better power out of the lot, they are going to set you back at least $2000 just for the motor, not including any labour/extra parts to have it put in. And its not really a DIY unless your 100% confident.

A normal 3sge would be a bit cheaper and easier to get put in (so to say) but still pretty pricey.

A V6 is pretty custom type of swap

In my opinion:
Exhaust, Intake, Cams - will be your cheaper options
Than you can start on suspension and weight reduction
Than see what route you want to take with a motor, but in my eyes, if your paying for a new motor and the labour to have it put in, the extra couple of $100 between all the motors, i would be going the 3SGTE.

[Chovies]

As posted before, have a GOOOOOOOD read through all them stickies that were linked above.
Yes there are multiple engines (somewhat) readily available to us in australia.
3SGE
3SGE - Beams
3SGTE - but you dont want turbo
Or a V6 Swap.

Mind you, a Beams and 3sgte will give you the better power out of the lot, they are going to set you back at least $2000 just for the motor, not including any labour/extra parts to have it put in. And its not really a DIY unless your 100% confident.

A normal 3sge would be a bit cheaper and easier to get put in (so to say) but still pretty pricey.

A V6 is pretty custom type of swap

In my opinion:
Exhaust, Intake, Cams - will be your cheaper options
Than you can start on suspension and weight reduction
Than see what route you want to take with a motor, but in my eyes, if your paying for a new motor and the labour to have it put in, the extra couple of $100 between all the motors, i would be going the 3SGTE.

Have you ever looked at a 3stge in NSW Tim ? I've heard rumors that the RTA/Police doesn't accept the engineering work on them.