![]() |
![]() |
![]() |
|
Enthusiast Joined May 20, '13 From belgium Currently Offline Reputation: 0 (0%) ![]() |
hello,
i have a 95 celica GT FOUR and yesterday i found an old intake i had lying around. the intake fitted directly onto my stock intake hose. the only problem is that i can not longer connect my blow off valve is it possible to keep the stock BOV and use the intake? Bram |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
Yes. You can just leave it disconnected and vent the charged air to the atmosphere. Some people put a little air filter on them too. I think he means can the stock BOV fit onto the aftermarket piping Since he said there was no port/flange on the intake to connect it to, he can just leave it disconnected and venting. It will still function normally not being connected to the intake. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) ![]() |
Yes. You can just leave it disconnected and vent the charged air to the atmosphere. Some people put a little air filter on them too. I think he means can the stock BOV fit onto the aftermarket piping Since he said there was no port/flange on the intake to connect it to, he can just leave it disconnected and venting. It will still function normally not being connected to the intake. No, as in the BOV, as a whole piece, will not mount onto the aftermarket piping. He's not talking about it venting to the atmosphere. He needs to know if the stock bov will bolt onto the aftermarket piping |
![]() ![]() |
Lo-Fi Version | Time is now: June 5th, 2025 - 3:40 PM |