wtb: 3sge Beams redtop/greytop Cylinder Head, greytop refers to 3sge beams in Rav 4 Options

[BonzaiCelica]

I blew coil pack on cylinder 3 and need the cylinder head rethreaded. i need a bare cylinder head or even better yet with the valves already in place that way i don't have to sit valves when i take off the head.


nonetheless let me know what you have im crunching for time.

This post has been edited by BonzaiCelica: Sep 10, 2013 - 5:49 PM

[onnaj]

Only the crankshaft and rod bearing and piston rings would cost around $ 360 without shipping to the us.
When the rods are gone add about $145 a rod. Pistons (0.5 OS) $80 a piece. Engine overhaul gasket kit, add another $300, etc etc.

From my experience i can tell that when you've opened the engine you think like this: "hmm the engine is open why not replace this at the same time. Wait this is easy to change also now when it's open, etc etc."

I did a complete Blacktop rebuild myself (parts are comparable regarding the price) and only for rebuilding parts it costed me somewhere around the $1800 mark. With all the labour (like cleaning the engine, hone the cylinders, etc) i think it'd be somewehere around $2200.

So it's somewhat expensive the SS3 parts.
By the way the prices are all for OEM parts.

If you need anything you can always email me. I get the parts directly from Japan.