Coilovers + Spacers Help, Need moar stance Options

[Chovies]

Hey All,

So the next step in my work on the car is to lower it a bit more and add spacers to the rears the get the flush look and i just wanted to get all your advice on what the best gear is etc,

1; What are some good adjustable coilovers that will work on a 94 ? Under $1000 and supplied to AUS if possible haha.

2; Same deal with spacers, how thick should i get, who should i get them from and should i fit them first so i know how low i can go ?

Rims are 18x8.5 et35 on 225/40 tires.
Here's a photo that might help with the spacer issue, its a thumbnail so click through.




PS: I know i have to get my guards rolled and all that, its no biggie yet.
Anthony

This post has been edited by Chovies: Jul 12, 2013 - 3:37 AM

[The_enD]

There are multiple threads about coilovers.
And for spacers. Search function.

[Chovies]

There are multiple threads about coilovers.
And for spacers. Search function.

Agreed but spacers seem to be a car by car thing and when i searched i was looking at people saying 10mm is best and next result was 35mm, and im just looking for a generalized answer about best gear in regards to coilovers cause...laziness haha

Edit, was still searching ebay when i posted all this and came across these, The extra straight up cost covers what i would pay for overseas shipping just not sure if they are a reputable brand ?
http://www.ebay.com.au/itm/BC-Racing-BR-Co...=item232d1204fa

This post has been edited by Chovies: Jul 12, 2013 - 4:11 AM

[The_enD]

There are multiple threads about coilovers.
And for spacers. Search function.

Agreed but spacers seem to be a car by car thing and when i searched i was looking at people saying 10mm is best and next result was 35mm, and im just looking for a generalized answer about best gear in regards to coilovers cause...laziness haha

Edit, was still searching ebay when i posted all this and came across these, The extra straight up cost covers what i would pay for overseas shipping just not sure if they are a reputable brand ?
http://www.ebay.com.au/itm/BC-Racing-BR-Co...=item232d1204fa

I understand. You might have seen my thread as well asking the same question about spacers. What I ended up doing is I just went and measured how much the wheel has to poke for the desired effect.

I decided to drop the idea for spacers for the moment and wait till I get coilovers.