 rear camber kit, anyone have one installed? |
 Jul 15, 2013 - 8:32 PM
|
 
|
|
Enthusiast  Joined Feb 28, '03 From So-Cal Currently Offline Reputation: 1 (100%)  |
hey guys, i have a 94 GT dropped on Megan coils. i havent adjusted the coils so they're spec from the factory. i have the stock 17" Tc rims on it and you can clearly see the negative camber (3˚ if i remember right). anyone out there have just about the same specs as i do but without the camber? any input would be greatly appreciated. thanks in advance guys! ill try to get pictures of the rear wheels tomorrow.
|
 |
Replies
|
Jul 23, 2013 - 11:38 PM
|
|
|
Enthusiast Joined Aug 2, '06 From bay area Currently Offline Reputation: 21 (100%) |
my kit had 4 bolts on it. replaced both sides or the rear bolts!!
|
|
Jul 24, 2013 - 4:22 AM
|
|
 Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (azn87 @ Jul 23, 2013 - 9:38 PM)  my kit had 4 bolts on it. replaced both sides or the rear bolts!! You probably had the full kit. One bolt for each strut. Wouldn't recommend using two camber bolts on one strut. I doubt it'll be safe having two smaller bolts. Almost half the size of the stock ones. To hold the struts. Lol. -------------------- |
Posts in this topic
celicaracer8o5 rear camber kit Jul 15, 2013 - 8:32 PM
Tigawoods do you have adjustable rear top mounts? I cant rec... Jul 15, 2013 - 8:40 PM celicaracer8o5 no rear top mounts checked when i noticed the camb... Jul 15, 2013 - 8:42 PM ILoveMySilly97 Best bet is buy the camber bolt and adjust it all ... Jul 15, 2013 - 11:13 PM ILoveMySilly97 I remember mine was around 3-4 degrees and once I ... Jul 16, 2013 - 4:24 PM CrossCudi If u purchased the EZ Street series, you wont have... Jul 16, 2013 - 5:56 PM
ILoveMySilly97 QUOTE (CrossCudi @ Jul 16, 2013 - 3... Jul 20, 2013 - 12:19 PM CrossCudi ^^^^ yes, that is correct.. sorry ! Jul 22, 2013 - 7:39 PM celicaracer8o5 how much are you looking for the camber bolts? are... Jul 22, 2013 - 9:17 PM ILoveMySilly97 QUOTE (celicaracer8o5 @ Jul 22, 2013 - 7... Jul 22, 2013 - 11:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 25th, 2025 - 4:34 PM |