Mar 4, 2004 - 9:54 PM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 4, '03 Currently Offline Reputation: 0 (0%) |
Ive been wondering how do you install a 3 point racing harness when you dont have a roll cage??
I thought you just bolt it down to the floor but where is a brace to attach it to. -------------------- hows it taste motha f*cka |
![]() |
Mar 5, 2004 - 11:52 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Aug 29, '02 From Dallas, Tx Currently Offline Reputation: 0 (0%) |
First off, you already have a 3-point harness....the stock seatbelt attaches at 3 points. You're thinking of a 4,5,or 6-point racing harness.
Both the above guys are correct. You'll have to have a harness bar made, or install a cage to mount the belt properly. There is an exception to this rule however. If you're only using the harness for autox where the chances of a collision are less than getting hit by lightning, then it is acceptabe to clip it into the rear seat belt. This is how my harness is done. It is not there for protection in a crash, it is only there to keep me from sliding around in the car at over 1g and help me feel what the car is doing. I never use it on the street. |
Sev408 Racing Harnessess Mar 4, 2004 - 9:54 PM
stelica85 i thought i heard its very dangerous to bolt it to... Mar 5, 2004 - 10:17 AM
BigEdge169 Yes, it is incorrect to just mount it to the floor... Mar 5, 2004 - 11:42 AM
NEVERSTOP I was under the assumption that you could mount th... Mar 5, 2004 - 12:15 PM
SpedToe169 Um, why would you need to mount them to the floor ... Mar 5, 2004 - 12:52 PM
NEVERSTOP QUOTE Um, why would you need to mount them to the ... Mar 5, 2004 - 1:16 PM
Sev408 so can you get a bar that attaches from each seatb... Mar 5, 2004 - 6:16 PM
SpedToe169 QUOTE Yeah i thought 3 pt harnessess had 2 straps ... Mar 6, 2004 - 7:29 PM
celimanST QUOTE Lets back up. Do you have a cage or a harnes... Mar 7, 2004 - 1:49 AM
SpedToe169 Yeah, if you don't have the money to do it rig... Mar 7, 2004 - 12:12 PM
Sev408 ok to make this easier.
Where can i get a harness... Mar 7, 2004 - 12:55 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 19th, 2026 - 12:54 PM |