![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Sep 4, '03 From Twin Cities MN Currently Offline Reputation: 2 (100%) ![]() |
so how hard is it? what tools do I need? how long does it take? how do i do it exactly? My driver side high beam is becoming an aquarium, and i want to fix it... any help would be appreciated, thanks!
-------------------- Car #3: 98 Accord LX- purchased 5/06, totaled 8/06
Car #2: 95 Celica GT- purchased 8/03, current daily driver Car #1: 01 Focus ZX3- purchased 5/01, sold 8/03 |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
just attach a chain to your grage and one to the front bumper... put it in reverse and slam on it... it'll take it off real quick
![]() Naw seriously its pretty easy and will take about 2-3hrs to get it off, drain the light, and put it back on. bigedge169 is correct on it.. think there might be 4 on each fender but could be wrong.. know there are 3 for sure and think there was a 4th down at the bottom. you will need to unbolt the lower engine covers on the front (thin black plastic covers under the motor) dont have to take them completly off just undo them where they attach to the front bupmer. To take the light off its only 3 bolts and unplug the harness. Besure that you dry out the headlight completely while you have it off... that way it doesnt get moisture spots in it -------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 4:07 AM |