![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Aug 1, '12 From UK Currently Offline Reputation: 0 (0%) ![]() |
Can some one help me on this one.
I have got some new Speedo gauge panels from www.visual-performance.co.uk and to wire them up you need to locate the Live Electrical Wire for the Instrument lights (Red Wire) and also need to locate a earth or netrual connection (Black Wire) I have taken a picture of the guage panel if some could point out the correct wires. ![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Oct 30, '12 From Cheshire Currently Offline Reputation: 0 (0%) ![]() |
You getting any buzzing from the transistor? I took my glo-gauges back out coz of it but my wiring was a temp-job to see how they looked (i grounded at the kick panel and took the live from the rear light fuse, also looped the on/off control so they only came on with the low/high beam)
I couldn't work out if the buzzing was normal or not so just left them out... |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 2:53 PM |