![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) ![]() |
Hello guys.
Today I've installed tein s tech lowering springs on my celi. The front ones are good, dropped like 2cm+ and it is like I wanted, but installing rear lowering springs didn't give that much difference such as the front ones. Also rear tein springs are higher than the stock ones. Is it normal? Can it get more lower during the ride? ![]() Thanks -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Oct 24, '09 From Appleton, Wisconsin 54915 Currently Offline Reputation: 7 (100%) ![]() |
You may have to give the springs time to "settle" and it may take up to 1 month. I've noticed mine got even lower after the installation of 25mm ichiba spacers all around as well. I'll actually bottom out if i have more than 1 passenger.
It is normal though to have it lower in the front since they state a 1.4" drop in the front and only a .9" drop in the rear. If you'd like i can post photos since im riding on KYB GR2 struts, Tein S-Techs and Im even using KYB mounts. This post has been edited by cyberblader1130: Aug 2, 2013 - 8:56 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 22nd, 2025 - 12:32 PM |