Aug 12, 2013 - 12:05 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 2, '06 From bay area Currently Offline Reputation: 21 (100%) |
i was wondering what does hid amperage range for a 35 watt kit? i want to make sure that i dont over use a rated wire, and possible start a fire because i am using the wrong guage wire? any input would be helpful...
|
![]() |
Aug 13, 2013 - 12:08 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 2, '06 From bay area Currently Offline Reputation: 21 (100%) |
so a basic wiring kit would do the trick and wont get hot while being used for a prolong of time?
|
Aug 13, 2013 - 12:35 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Sep 23, '12 From Australia Currently Offline Reputation: 4 (100%) |
so a basic wiring kit would do the trick and wont get hot while being used for a prolong of time? HID kits use less power when compared with incandescent lights and output more light as well. This is why they are becoming more popular. A basic wiring kit should be fine and not burn out, especially it is is designed for incandescent bulbs. Just make sure you know what the amperage rating of the exact kit you have is, and the amp rating on the wires. Also, be careful of the eBay branded HID kits, because some of them actually use ridiculous amount of power because of bad designs and crappy parts... -------------------- ![]() ------------------------------| White '94 Celica | Bought 11/05/12 | Sold 12/05/15 |------------------------------ |
azn87 hid fog lights Aug 12, 2013 - 12:05 AM
travisxcore 2.917 amps @ 12 volts. They'll peak at around ... Aug 12, 2013 - 12:51 AM
azn87 ill be using this kit from ddm tuning
http://www.d... Aug 13, 2013 - 12:37 AM
Box The factory wiring should be sufficient. Aug 13, 2013 - 1:08 AM
azn87 There is no stock wiring on a 94 gt Aug 13, 2013 - 2:07 AM
Box QUOTE (azn87 @ Aug 13, 2013 - 2:07 A... Aug 13, 2013 - 2:59 AM
The_enD RE: hid fog lights Aug 13, 2013 - 2:37 AM
azn87 I'm going to use 94 stock fog lights with ddm ... Aug 13, 2013 - 12:11 PM
Box 15-20A relay would suffice. Aug 13, 2013 - 1:48 PM
azn87 this is the kit i was thinking about.... i also ... Aug 13, 2013 - 11:28 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 9:35 AM |