 internal engine parts |
 Mar 6, 2004 - 11:21 AM
|
 
|
 Enthusiast  Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%)  |
http://www.importperformanceparts.net/
this is the site i was looking around, and i went to toyota, then camshafts, then topline camshafts, then down to a 7afe celica, will this work?!?!? will it help me out any? oh and also they say they have connecting rods under the connecting rods section and then in topline This post has been edited by playr158: Mar 6, 2004 - 11:29 AM |
 |
Replies
|
Mar 7, 2004 - 2:24 AM
|
|
|
Enthusiast Joined Jul 31, '03 From Panama City Beach, FL Currently Offline Reputation: 1 (100%) |
i'm sure 90% of you know this by now, but when i talked to raeeng.com about custom forged rods to fit some 4a-gze pistons, they quoted me $700 just for the rods. i even sent them one of my old rods to see if any of there existing stock could be modified or machined to work but they had nothing. so if your looking to get a piston/rod combo, you will probably be looking at $1100 not to mention the rebuild kit and new rings/ bearings that your going to need. well worth it in the long run of forced induction but it will hurt at the time of transaction.
|
Posts in this topic
playr158 internal engine parts Mar 6, 2004 - 11:21 AM
SpedToe169 Wow, good find. They actually have a lot of stuff... Mar 6, 2004 - 7:16 PM playr158 so where can i find forged pistons ?> Mar 6, 2004 - 10:40 PM S_C_M As far as I know, you'd need to have custom fo... Mar 7, 2004 - 12:23 AM SpedToe169 Yup, $1100 sounds about right. I'm keepi... Mar 7, 2004 - 12:09 PM DustyBurns30 how much will that cost to do all that machining o... Mar 7, 2004 - 4:30 PM Hym3n I know this has been asked before, but on that sit... Mar 7, 2004 - 6:27 PM toyotaspeed_90 i'll keep you guys posted.... the guy who help... Mar 7, 2004 - 7:19 PM FallenHero QUOTE (SpedToe169 @ Mar 7, 2004 - 10:09 AM) Yup, ... Mar 7, 2004 - 8:11 PM initialdrift55 to bring it up again what types of changes will th... Mar 8, 2004 - 12:11 PM DustyBurns30 i believe you will need a custom down pipe, and yo... Mar 8, 2004 - 1:24 PM SpedToe169 QUOTE how much will that cost to do all that machi... Mar 8, 2004 - 7:57 PM zipstrips there are "off the shelf pistons" for th... Mar 10, 2004 - 7:16 PM
FallenHero You need to get those pistons fitted to the rods a... Mar 10, 2004 - 9:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 28th, 2026 - 5:56 AM |