 Rear Motor Mount |
 Aug 24, 2013 - 5:52 PM
|
 
|
|
Enthusiast  Joined Nov 13, '12 From Sacramento Currently Offline Reputation: 0 (0%)  |
Okay, I'll admit, I'm a little bit of a noob. But how did you guys get the rear motor mount off? I already took off all the bolts and nuts, but there just doesn't seem to have enough clearance to pull out the motor mount. Any tips? Thank you everyone.
|
 |
Replies
|
Sep 1, 2013 - 10:11 AM
|
|
|
Enthusiast Joined Aug 31, '13 From Wyoming Currently Offline Reputation: 0 (0%) |
Yep these guys are exactly right... here was my experience. I took out the front most motor mount, then with a hoist on the motor so it wouldn't twist or fall , take the bolts out of the crossmember at the front of the car, then bolts out of that back mount. then lift the motor a hair, drop the front of the cross member and try to un sandwich it from the frame and mount. it WILL come out =) Just as fun going back together too
Remember the rear mount bolts are long, they go all the way through the cross member and frame. This post has been edited by Roadrash: Sep 1, 2013 - 10:13 AM |
Posts in this topic
1994whitecelicagt Rear Motor Mount Aug 24, 2013 - 5:52 PM
Malek Ha, the rear mount..
Well, the easiest way I... Aug 24, 2013 - 8:17 PM
Syaoran QUOTE (Malek @ Aug 24, 2013 - 9:17 P... Aug 28, 2013 - 9:47 AM trdproven remove the trans side mount, get another jack, pla... Aug 26, 2013 - 12:53 AM trdproven yea...you would have to play with the whole crossm... Aug 28, 2013 - 6:35 PM BonzaiCelica where is njcmd2002 post on his video. it should be... Sep 3, 2013 - 5:11 PM Batman722 QUOTE (BonzaiCelica @ Sep 3, 2013 - 6... Sep 3, 2013 - 6:46 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 16th, 2025 - 5:09 PM |