3sge 3d gen swap help Options

[mi645]

So I have a 99 stock Celica gt I just got a 3d gen 3sge with full wiring uncut I was wondering web I swap this motor do I need to sauter or slice and wire anything or it all bolts in even the wiring?
Also do we use the oem 5sfe fuse box or the new 3sge fuse box?
I'm currently tuning up the motor new timing belt water pump etc.
Motor came with exhaust manifold but no b pipe does the stock 5sfe
Exhaust manifold bolt on? Just for temporary use?
Any advice from anyone please Ive been googling and searching threads but found nothing for 3d gen swap not beams.
What do I have to modify? Do I need to convert a fuel filter or bracket? The fuel lines are uncut on the motor I got only thing seems to be cut is the shifter cables and axels

[czwalga]

The harness has to be extended. There's 6 or 7 connectors where the ECU goes to. 4 go to the ECU the others go to the body connectors. So yeah the harness does kinda have to be extended to go down there. Yeah you could do something crazy to not half to extend all of it, but that would be harder on the brain than just extending the harness.

The part you have to be concerned about is the fuse box area... even if its not cut I doubt everything just snaps together perfectly. Buy the green book for our cars on ebay for the electrical manuals. It's like $20. Well worth it, won't tell you everything because it doesnt have 3sge info in it but you can piece it together.


Wiring doesnt scare me though, and the toyota books have the best electrical schematics i've seen. Nice and colored.

Damned the hydraulic tensioner is a pain... Anyways while I was impacting off the cam gears they moved a tooth both to the left web I put the belt back together do I have to worry about the timing or a tooth might not even matter? Since they both moved a tooth back

Set the timing, start from scratch. Even one tooth it may not idle.