 E56 TRANSMISSION. |
 Sep 9, 2013 - 4:10 PM
|
 
|
|
Enthusiast  Joined May 23, '12 From northridge,CA Currently Offline Reputation: 3 (100%)  |
so with my new 3sge came an e56 transmission. they cut out the axles right after the outer shaft. so I need new outer shafts does anyone know which outer shafts are compatible? here in the us?
also the shifter cables are cut. I asked someone with the same trans he told me he used the ST model celicas shifter cables and they worked? is this correct? can anyone help me please none of this is covered ive searched threads and threads but no 1 clarified 100% about the outer shaft not the hybrid mr2 combo just the stock inner shaft on e56 which outer shafts work? also the shifter cables please and thank you. ive already figured that mr2 3sgte 2nd gen turbo uses same cam seals and crank seal and oil pump seal as the 3sge 3d gen na only difference is timing belt and 1 of the tensioners idlers. also water pump only the outer portion works. |
 |
Replies
|
Sep 13, 2013 - 11:38 AM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
The E56 is still an E series so maybe MR2 axles and all-trac outters will work.
but go the cheaper route, use your S54. who cares if you are a few hundred RPM slower in 5th gear -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
mi645 E56 TRANSMISSION. Sep 9, 2013 - 4:10 PM
Rusty The E56 is a special transmission, I wrote up my t... Sep 9, 2013 - 4:51 PM ILoveMySilly97 Off topic but What's the gear ratio on the e56... Sep 10, 2013 - 2:16 AM Rusty see sticky for gear ratios Sep 10, 2013 - 2:43 AM mi645 the gearing is closer from 1st to 2nd but compared... Sep 10, 2013 - 1:15 PM BonzaiCelica Dude e56 will have a higher rpm on fwy its 4.256 v... Sep 10, 2013 - 3:31 PM mi645 r u sure? maybe I mixed them up? can someone clari... Sep 10, 2013 - 3:41 PM Rusty should have looked at the sticky first Sep 10, 2013 - 3:53 PM mi645 so yes the e56 will rev lower on the fwy in 5th ge... Sep 10, 2013 - 4:43 PM BonzaiCelica QUOTE (BonzaiCelica @ Sep 16, 2009 - 3... Sep 10, 2013 - 5:31 PM frotou Off topic ; can I have this graphic somewhere for ... Sep 10, 2013 - 5:46 PM mi645 I'm pretty sure the final drive in the s54 is ... Sep 10, 2013 - 10:03 PM mi645 well honestly I would like to use my s54 but the c... Sep 13, 2013 - 2:37 PM KAOS Back from the dead!
So the 5S/S54 axels are w... Jul 21, 2014 - 11:51 AM
mi645 kaos ur transmission is 100% an S tansmission, the... Jul 24, 2014 - 12:00 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 21st, 2025 - 5:21 PM |