![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 23, '12 From northridge,CA Currently Offline Reputation: 3 (100%) ![]() |
so with my new 3sge came an e56 transmission. they cut out the axles right after the outer shaft. so I need new outer shafts does anyone know which outer shafts are compatible? here in the us?
also the shifter cables are cut. I asked someone with the same trans he told me he used the ST model celicas shifter cables and they worked? is this correct? can anyone help me please none of this is covered ive searched threads and threads but no 1 clarified 100% about the outer shaft not the hybrid mr2 combo just the stock inner shaft on e56 which outer shafts work? also the shifter cables please and thank you. ive already figured that mr2 3sgte 2nd gen turbo uses same cam seals and crank seal and oil pump seal as the 3sge 3d gen na only difference is timing belt and 1 of the tensioners idlers. also water pump only the outer portion works. |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 23, '12 From northridge,CA Currently Offline Reputation: 3 (100%) ![]() |
well honestly I would like to use my s54 but the clutch is bad. 1 axle is bad and it has a bad shift fork so it drives pretty bad.
that's why id rather use the e56 that came with my set up. thanks smaay. and I like ur v6 set up good work. |
![]() ![]() |
Lo-Fi Version | Time is now: June 9th, 2025 - 5:25 AM |