ST202 Gear Cable / Linkage, part required, any differences with other variants Options

[NAWTY]

Hi,
I've been on here a while and have made use of all the helpful info on here so far but need advice on my first post about gear cables.

I have a 97/P reg ST202 IMPORT, and have noticed a bodge job done on my gear cables... Basically the cables which I believe are the wrong model of from another Toyota make, were supplied and fitted to replace the original but where the cables join the gearbox and is secured with the brackets, it was secured with a dozen cable ties.

This is due to the round bung bit does not go all the way through enough for me to insert the brackets in. (pics included)

My question is, will the gear cables from an ST205 be the same fitment as an ST202 regardless if its an import or not, as i'm finding it hard to get hold one of an ST202.

Many thanks in advance for the replies, etc.

[Rusty]

Not 100% true about ST202 & ST204's having the same cables
When the SS-II had the E56 it used the same as the ST205/GT4 as they both had the same transmission case.

But in this case its a S54. Wouldn't source from the US, just get them local, save on shipping...

If your after new ones
33820-2B320 (09/1993 - 11/1997)
33820-2B321 (12/1997 - )
http://www.toyodiy.com/parts/p_J_1997_TOYO...MVF_3312.2.html