FS Full E153 Manual Transmission Swap for 5SFE, TWM Short Shifter, ACT Clutch, Fidanza Flywheel, Speed Source... Options

[RichieRichJP]

Full E153 Manual Transmission Swap Parts

Prices are in bold. Add shipping.

- Pedal/Bracket, throttle linkage, clutch master cylinder and OEM slave cylinder (both 6K Miles), OEM Transmission Mount, steering knuckles, shifter surround ($250)
- 1996 5SFE Federal Emissions Manual ECU ($50)
- TRD Shift Knob ($15)







5SFE ACT Street Clutch w/ e153 spline 4-puck unsprung clutch disc, 6K Miles, rated 210lbs/tq & 5SFE Fidanza Flywheel
- 5SFE ACT Street Clutch w/ e153 spline 4-puck unsprung clutch disc, 6K Miles, rated 210lbs/tq
Price: $350 + shipping

- 5SFE Fidanza Flywheel (40K Miles; has a replaceable friction plate)
Price: $175 + shipping









I am willing to drive halfway or up to 6hrs one way, whichever is the least miles. One-way trip of gas must be paid for in advance.

32571

This post has been edited by RichieRichJP: Jun 10, 2014 - 8:30 PM

Reason for edit: Please remember to add FS in the topic title

[RichieRichJP]

I just plan on selling them with the transmission. I'll eventually part them, but not in the next couple weeks. If this stuff isn't selling, then I'll part with them.
They will work on a 3SGTE non-lsd; they will also work on a 3SGTE with certain LSD's. I know there were a few, but Quaife is the only one I remember off the top of my head that it will work with.
As for the bracket, I personally don't recommend this on a Celica simply because the rear motor mount is probably different than of a Camry. The carrier bearing on these axles are a combination of the Camry upper motor mount bracket and the carrier bearing itself. Although I'll be shooting myself in the foot saying this, since it would not be put into a Camry, save yourself the money and just source a carrier bearing from an MR2. I bought the one for my MR2 for something like $35 shipped.

I have shipped Greyhound freight before. It's a bit of a pain in the ass since it's almost an hour away. But I can make it happen.

This post has been edited by RichieRichJP: Oct 28, 2013 - 4:15 PM