ST202 3S-GTE, Need all out power advice? Options

[Tee12TRD]

I want to go all out. What would be a nice turbo and things that will make me get 400+ WHP?

https://www.facebook.com/photo.php?fbid=216...e=3&theater

https://www.facebook.com/photo.php?fbid=218...e=3&theater

[delusionz]

by tuning your standard turbo to 20psi on high octane pump fuel you will reach 100% injector duty, giving you the full power your fuel system will ever allow. this will also be very close to the mechanical limits of a stock unopened motor.

by changing your turbo you will reach those limits at a lower boost level at a sacrifice of accelerator response and low rpm pull proportional to the size increase of the turbo

in order to make use of the extra power a bigger turbo can provide, the engine internals will need to be forged, the intercooling system needs to be upgraded, the head needs work to take the extra flow and the fuel system needs to be completely overhauled.

[Tee12TRD]

I'm talking about high upgrades parts and turbo upgrades..what would be best to make it 400+ (FWD)...I'm planning to go one mod to get 400+ and that's it. For stander stock 17 psi would be best for the stock 3sgte 3 gen (300+)...but it's not enough for me. I'm looking for ideas from other and what other run.

[mkernz22]

I'm talking about high upgrades parts and turbo upgrades..what would be best to make it 400+ (FWD)...I'm planning to go one mod to get 400+ and that's it. For stander stock 17 psi would be best for the stock 3sgte 3 gen (300+)...but it's not enough for me. I'm looking for ideas from other and what other run.

You can't just do 1 mod to get 400+. You could upgrade the turbo to a 70 trim, but then you'll blow your engine components to pieces.

In order to get 400whp, you'd need to upgrade the turbo, the fuel system, get a boost controller, some sort of fuel management system.

Have you ever built an engine before? If not, I suggest you read up and learn about it.