Noise from front drivers side, Think it might be the motor mount Options

[mgnt232]

Ok so just recently a pretty loud noise has started coming from the 'front drivers side wheel area'.

The noise is ONLY when I'm accelerating/on the gas at all. As soon as I take my foot aft the gas it stops (kind of a squealing/clunking/grinding noise). Thats why I'm thinking it could be the rear motor mount, if its bad then it would tweak a little and the axle wouldn't line up the way its supposed to right?

I jacked the car up and no noises just spinning the wheel, bearing doesn't seem to have any play in it. All the other suspension parts a like brand new.

Just trying to narrow it down, if its ONLY when I press on the gas, what else could it be?

I took a pic of the front and rear mounts, and the rear looks a lot worse, but idk if that bad enough to make the noises.

Rear - It looks a lot more worn down



Front - looks in a lot better shape




Found a poly mount wondering if it will work, idk how they replace the one now? like how does the rubber part come out? or is there a better mount option?
http://speed-source.net/?wpsc-product=toyota-engine-mounts
says for gt4, but the gt mounts should be the same right?


This post has been edited by mgnt232: Dec 3, 2013 - 1:32 PM

[toyota123]

You have to cut the rubber out and slide the 2 pieces in. The gt4 mounts do not fit exactly. I tried when I did mine and ended up paying $160 to toyota for the front mount because no one else had it. The rear mount is a little to wide and the front mount is to small around to fill the hole there is a not her place that has them that are supposed to work for the 5s I'll see if I can find and link