May 20, 2013 - 12:10 PM
|
|
|
Enthusiast ![]() Joined Aug 2, '11 From southampton Currently Offline Reputation: 0 (0%) |
Hi guys, don't post on here really as post on a UK celica forum.... but thought I would share what I have done to my SSI.
Following the various 5sfte posts and guidance, I have now turbo'd my 3sfe engine, some pics of the engine bay (its had a little more done since this one - including changing boost gauge t-off point to the map sensor line) and other bits at end of post. Have installed; 3sge injectors ct26 turbo emanage blue (getting tuned in a couple of weeks) ST185 manifold ST185 map sensor 2.25" intercooler pipes and intercooler Apexi BOV ST185 pan boost and oil gauges 2.5" custom ss exhaust Been a fun and frustrating build, the turbo would not clear the coolant hard lines on the rev 3 3sfe, so I had to source a spacer for between the manifold and turbo. Changing the oil pan is fun too! Didn't need to relocate oil filter, so that was a bit easier. Coolant lines off the throttle body so again pretty easy. Intercooler piping was interesting, right side through air pox route, left side was a bit of a squueze! But did not need ot remove a/c or anything else. Not driven it on boost yet, but has been driven for several hours off boost, and doesn't miss a beat. Injector size has gone from 215cc (rev 3 3sfe stock I believe) to 295 (3sge stock), running on stock fuel pump, so some scope to improve there. First map though is just a safe one to ensure no det, etc. Plans next will be; wideband sensor and gauge (hooked into emanate) prob bigger injectors and fuel pump sort out second output for boost gauge from throttle bottle to leave map sensor feed unmolested Wilwood 4 pot brakes looking forward to running boost! ![]()
This post has been edited by digs: May 20, 2013 - 1:56 PM |
![]() |
Dec 12, 2013 - 6:49 AM
|
|
|
Enthusiast ![]() Joined Aug 2, '11 From southampton Currently Offline Reputation: 0 (0%) |
As you see, it does have similar power, but don't just look at the power, look at the RPM it makes that power. The 5SFE makes its peak at 5400RPM while the 3SFE makes it at 6000RPM which means it likes revving higher than the 5S, which is better for turbocharged applications, in terms of power. However the 5S-FE will spool the same turbo faster and make more torque. having no experience of the 5sfe, I can say (any boost leaks not withstanding which may be clouding my view) my 3sfte does suffer from turbolag more than I expected, however when in higher revs becomes a very fun car to drive, 5.5 to 6k and it feels quite alive, boost is kicking in big time, etc. However....I am thinking the 5sfte may be more fun if boost is coming in lower and easier. Though it does mean I can easily drive my 3sfte off boost, and still actually enjoy it. Just have to "work" for boost with it (though 2 or 3psi going up hills kicks in quickly and makes accelerating up them easier!) |
digs 3SFTE project May 20, 2013 - 12:10 PM
Smaay i ran my 5S-FTE setup without the water lines. you... May 20, 2013 - 12:24 PM
digs QUOTE (Smaay @ May 20, 2013 - 1:24 P... May 20, 2013 - 12:29 PM
digs How safe then is it to drive on boost as set up? N... May 20, 2013 - 12:39 PM
Smaay i would also suggest you change that water hose ri... May 20, 2013 - 12:50 PM
digs QUOTE (Smaay @ May 20, 2013 - 1:50 P... May 20, 2013 - 12:54 PM
Syaoran My recommendation would be to get at least 440cc i... May 20, 2013 - 1:31 PM
digs I do think I will need bigger injectors, so useful... May 20, 2013 - 1:51 PM
Syaoran QUOTE (digs @ May 20, 2013 - 2:51 PM... May 20, 2013 - 4:28 PM
Smaay all 2ZZ injectors are High Impedance. but they are... May 20, 2013 - 5:44 PM
Syaoran QUOTE (Smaay @ May 20, 2013 - 6:44 P... May 20, 2013 - 7:52 PM

Smaay QUOTE (Syaoran @ May 20, 2013 - 5:52... May 21, 2013 - 8:23 AM

95CelicaST QUOTE (Smaay @ May 21, 2013 - 6:23 A... May 21, 2013 - 9:40 AM

Syaoran QUOTE (Smaay @ May 21, 2013 - 9:23 A... May 21, 2013 - 11:37 AM
digs QUOTE (Smaay @ May 20, 2013 - 6:44 P... May 21, 2013 - 10:44 AM
Syaoran Exige S:
The RX-7 high impedance 550cc injectors... May 20, 2013 - 7:59 PM
digs Thanks guys , really appreciate your input May 21, 2013 - 1:06 AM
digs Just an update, i have changed my PCV system with ... Jun 20, 2013 - 7:43 AM
Syaoran QUOTE (digs @ Jun 20, 2013 - 8:43 AM... Jun 20, 2013 - 1:50 PM
Smaay there is a check valve in the brake booster. dont ... Jun 20, 2013 - 9:03 AM
digs QUOTE (Smaay @ Jun 20, 2013 - 10:03 ... Jun 20, 2013 - 10:52 AM
digs Good to hear, makes that a bit easier
Thanks, lo... Jun 20, 2013 - 3:49 PM
digs 460cc injectors have arrived - had a thought thoug... Jul 9, 2013 - 4:23 AM
Syaoran QUOTE (digs @ Jul 9, 2013 - 5:23 AM)... Jul 9, 2013 - 1:13 PM
digs QUOTE (Syaoran @ Jul 9, 2013 - 2:13 ... Jul 9, 2013 - 1:23 PM
Syaoran I recommend not using it and waiting to get someth... Jul 10, 2013 - 8:06 PM
digs Thought I would swing by and update, engine still ... Dec 3, 2013 - 8:30 AM
H8TRAIN Very interesting, digs. I'm glad you posted th... Dec 5, 2013 - 10:06 PM
digs QUOTE (H8TRAIN @ Dec 5, 2013 - 10:06... Dec 9, 2013 - 3:57 PM
Syaoran 5S-FE was built for torque, not horsepower. The 3S... Dec 9, 2013 - 7:47 PM
H8TRAIN QUOTE (Syaoran @ Dec 9, 2013 - 7:47 ... Dec 10, 2013 - 12:01 AM
Syaoran QUOTE (H8TRAIN @ Dec 10, 2013 - 1:01... Dec 10, 2013 - 2:18 PM
delusionz ^--- Yup. Dec 10, 2013 - 2:12 PM
delusionz i dont think a 3sg head on a 3sf block would make ... Dec 12, 2013 - 1:23 AM
Syaoran It all depends on the turbo you're using.
3S-... Dec 12, 2013 - 11:03 PM
H8TRAIN QUOTE (Syaoran @ Dec 13, 2013 - 12:0... Dec 14, 2013 - 12:53 PM
digs Thanks for the info...
Tuning: Once the full thr... Dec 16, 2013 - 6:32 AM
digs an update...just grabbed a ST205 shell with engine... Feb 21, 2014 - 3:55 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 2:19 AM |