 Clutch not working, Swapped my motor |
 Dec 17, 2013 - 12:27 PM
|
 
|
 Enthusiast  Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%)  |
So I finished swapping my engine yesterday and the clutch doesnt work. I bled the slave cylinder but it appears to be functioning correctly. I can see the fork and throwout bearing pushing down the clutch fingers so I dont know what could be wrong.
Could I have installed the clutch disc backwards? I am about to pull the transmission to check the clutch unless I can find a stick of dynamite first. |
 |
Replies
|
Dec 17, 2013 - 4:08 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
It's possible the pedal needs adjusting.
I put a LW FW on my Rav when I swapped and the oem flywheel was 2x as thick. When I pushed the clutch the system worked but the disk wasn't making contact with the flywheel. We adjusted the pedal further and I have a fully working clutch. I should have just extended my push rod...I'll do that next week. -------------------- |
Posts in this topic
Special_Edy Clutch not working Dec 17, 2013 - 12:27 PM
Smaay its possible you put it on backwards. without seei... Dec 17, 2013 - 1:06 PM Smaay ugh you guys and the extended pushrod, it will not... Dec 17, 2013 - 6:41 PM Special_Edy Pulled the transmission, flipped the clutch disc a... Dec 18, 2013 - 10:24 AM
Smaay thats exactly what was happening. Dec 18, 2013 - 4:33 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 20th, 2025 - 10:31 PM |