6G Celicas Forums

Welcome Guest ( Log In | Register )

> Electric Supercharger
post Dec 18, 2013 - 12:17 AM
+Quote Post
VavAlephVav



Enthusiast
****
Joined Dec 3, '13
From Missourah
Currently Offline

Reputation: 0 (0%)




Wondering what experience anybody has had with these little electric supercharger systems like this one,

http://www.streetbeatcustoms.com/RAM/Super...r-System/18149/

says it makes 1psi boost and gets 15 hp. surely not as much boost as a nice supercharger,
but at $400 compared to the $6,000 kit for a supercharger, I may have to at least consider it ya know.


--------------------
Bust a Deal; Face the Wheel.
 
Start new topic
Replies
post Dec 19, 2013 - 3:17 PM
+Quote Post
VavAlephVav



Enthusiast
****
Joined Dec 3, '13
From Missourah
Currently Offline

Reputation: 0 (0%)




Yes, I totally agree and so I brought some slides to illustrate smile.gif

What we think of as a typical compressor is the piston/cylinder design our motors are;
piston goes up, compresses the air/fuel into a smaller volume.
This is called a Positive displacement compressor.

But a Centrifugal compressor is not a positive displacement compressor, it works a little different

these pics are of a machine used to compress vapor refrigerant, it is driven by a large electric motor but the compressor end is quite the same as what we call a turbo charger.
Just imagine a turbo unit about 36-48" across.





the compressor uses three main parts , the impeller, the diffuser, and the volute.



the vapor enters through the center, and then is quickly spun out into the diffuser, which is just sort of a ring with little holes in it, but this slows down the vapor while the impellor is continuously slamming more molecules on top of it.
This is how the vapor is compressed. Then, in the case of a car's turbo system, we now feed Compressed air to the system and you get a lot more Bang out of it.





the 'electric supercharger' is only the impeller without the compressor, so it certainly does not get the same effect.
and if you're running higher pressure you need stronger, larger pipes to manage it.


--------------------
Bust a Deal; Face the Wheel.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 9th, 2025 - 12:49 PM