keyless entry, and i searched. woo! go me Options

[mikew04]

Ok, got my keyless entry in yesterday, started to install it today. I got the power sources and ground, and i wired up the locks. That part works great! I want to also wire it up to the parking lights, but i dont know which wire it is, and also the horn and dome lights. Another question is the starter interupt... i know i need a relay for it, but how would i wire it up from there? its a "(-) 500 mA Armed Output" wire.
Sorry about all the Q's, but any help would be greatly appreciated.

*EDIT* BTW, the Horn Honk, Sarter Kill, Illuminated Entry and Parking Light wires are all negative trigger output wires...

-mike

This post has been edited by mikew04: Mar 9, 2004 - 10:28 PM

[Coomer]

For the parking lights, you'll wire terminal 85 of a SPDT automotive relay to the negative trigger parking light wire from your alarm. Terminals 30 and 86 will go to a fused +12 volts wire from the battery. Terminal 87 will go to your parking light wire at your driver's side kick panel.

For the illuminated entry, what I did is pull off the door sill and the kick panel cover on the driver's side. I then found a red and white wire that had this black thing shoved into a connector. I simply connected a wire to this wire, and then I wired that to terminal 87 of a relay. I connected terminal 86 to a fused +12 volts wire from the battery. Terminal 30 connects to a solid ground source, and terminal 85 goes to your illuminated entry from your alarm.

For the horn relay, I'm not really sure which wire it goes to, as I simply wired up a siren to my alarm.

For the starter kill, just follow this diagram.


Hope this helps.