 How to change ball joint (boot) |
 Jan 20, 2014 - 9:04 AM
|
 
|
|
Enthusiast  Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%)  |
Hello,
My celica didn't pass the yearly test because of a worn ball joint cover and the light adjustment. I'm wondering though how to replace the ball joint? Can't find a write up about it unfortunately so i don't know how much work is involved with it. Is it also possible to just change the boot for an aftermarket one? Thanks! -------------------- |
 |
Replies
|
Jan 20, 2014 - 2:30 PM
|
|
 Enthusiast Joined Dec 3, '13 From Missourah Currently Offline Reputation: 0 (0%) |
if you know your axles are good then yes, you can probably remove the ball-joint without taking the whole axle out.
maybe just turn the wheel to the side so you can get to it, remove the top nut and pin, then stick that fork where the boot is and smack it apart. then take the bottom bolts loose.  -------------------- Bust a Deal; Face the Wheel.
|
Posts in this topic
onnaj How to change ball joint (boot) Jan 20, 2014 - 9:04 AM
ILoveMySilly97 QUOTE (onnaj @ Jan 20, 2014 - 6:04 A... Jan 20, 2014 - 1:12 PM onnaj That's the thing i mean i guess. The lower bal... Jan 20, 2014 - 1:41 PM VavAlephVav check out this how-to on replacing the CV axle ass... Jan 20, 2014 - 2:10 PM onnaj Isn't a better option then to get the whole ax... Jan 20, 2014 - 2:22 PM richee3 I generally don't use a pickle fork or take my... Jan 20, 2014 - 2:36 PM njccmd2002 or if you have air tools, and air hammer gets it o... Jan 21, 2014 - 3:10 AM onnaj I have air tools happily Jan 21, 2014 - 3:11 AM SwissFerdi ^ Use those. I don't know what this new modera... Jan 21, 2014 - 7:06 AM rave2n I've always had to take the axle out, tried th... Jan 21, 2014 - 9:10 AM onnaj According to the guy that works at Toyota it shoul... Jan 21, 2014 - 10:06 AM richee3 True story. Sadly, last time I did it was in a car... Jan 21, 2014 - 2:19 PM
VavAlephVav QUOTE (richee3 @ Jan 21, 2014 - 3:19... Jan 21, 2014 - 8:56 PM onnaj So it has been done
Biggest problem was for the... Jan 23, 2014 - 11:18 AM richee3 It sounds like a difficult job but there's rea... Jan 23, 2014 - 12:34 PM ILoveMySilly97 QUOTE (richee3 @ Jan 23, 2014 - 9:34... Jan 23, 2014 - 2:13 PM onnaj QUOTE (ILoveMySilly97 @ Jan 23, 2014 - 8... Jan 23, 2014 - 2:52 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 25th, 2025 - 9:22 AM |