 Can someone with a GT-Four hood take a few measurements? |
 Feb 13, 2014 - 8:05 AM
|
 
|
 Enthusiast  Joined Apr 12, '13 Currently Offline Reputation: 53 (100%)  |
Ok, I need these to measurements.
And if you can, how thick are the bolts that hold the plastic mesh piece. Inches, millimeters, doesn't matter, just be precise.  Thank you. |
 |
Replies
|
Feb 14, 2014 - 4:24 AM
|
|
 Enthusiast Joined Apr 21, '13 From YYC Currently Offline Reputation: 1 (100%) |
Here you go!
6 bolts: 3 on the top, 3 on the bottom.   The bolts are part of the grill itself.   Measurements of the bolts:    Measurement of the nut (10mm socket to remove it)  Measurement of the distances from bolt to bolt Short side (Top side when looking down at the grill) 0", 5.5", 11"  Longer Side (Bottom side when looking down at the grill) 0", 7", 14"  I apologize, I realized as I was posting this that I should have used the metric side of the measuring tape since the measurements for everything in the car is metric. This post has been edited by Jeebus: Feb 14, 2014 - 4:29 AM |
Posts in this topic
The_enD Can someone with a GT-Four hood take a few measurements? Feb 13, 2014 - 8:05 AM
Jeebus 10mm bolts. Feb 13, 2014 - 2:37 PM
The_enD QUOTE (Jeebus @ Feb 13, 2014 - 9:37 ... Feb 13, 2014 - 2:47 PM Jeebus Didnt get to take measurements as I was in a rush ... Feb 13, 2014 - 3:43 PM The_enD QUOTE (Jeebus @ Feb 13, 2014 - 10:43... Feb 13, 2014 - 5:06 PM Nial Depends which size you are looking for? The mesh h... Feb 14, 2014 - 1:21 AM The_enD QUOTE (Nial @ Feb 14, 2014 - 8:21 AM... Feb 14, 2014 - 5:21 AM The_enD 10mm socket corresponds to 6mm bolt, just measured... Feb 14, 2014 - 7:43 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 6th, 2025 - 12:33 PM |