 7agte STOCK RODS 400HP, arp renault cleo rod bolts on 7afe rod |
 Feb 18, 2014 - 8:08 PM
|
 
|
|
Enthusiast Joined Jan 13, '14 From pompano Currently Offline Reputation: 0 (0%)  |
Put stock 7afe rods with renault cleo arp bolts to the test on my gt35r 7agte 23psi 387whp and 447whp 30psi
|
 |
Replies
|
Feb 19, 2014 - 3:33 PM
|
|
|
Enthusiast Joined Jan 13, '14 From pompano Currently Offline Reputation: 0 (0%) |
Well it was torchered on the dyno for over 3 hrs and at one point we had to take off oil cap cause oil got so hot the psi dropped super low and thats was sae 50.. and yes the car was abused on an old tune.. the pistons are cp.. i dont know how much stock ringlands can take on 7afe piston but i have a friend in jamaica thats 500whp on stick rods but eventually spun a bearing racing alot
On another note when was the last time anyone has seen a bend rod from boost on any 4age? The most important thing i believe is oil,tuner and clearances done on all engine parts at the machine shop.. what im most trying to say is for all those who are scared to boost up to 15psi daily on 7age setups with stock rods its ok as long as arp renualt cleo 16,v rod bolts. installed for this low budget build Racing and 3hrs on dyno 3Hrs dyno torcher and street racing.. so far no bent rods or rod failure. But im just watching for bearings |
Posts in this topic
holdmywetnutz 7agte STOCK RODS 400HP Feb 18, 2014 - 8:08 PM
njccmd2002 cool story bro, but it just does not make sense, w... Feb 18, 2014 - 11:33 PM CAcelica29 he is saying the stock 7a rods will hold 400+whp..... Feb 19, 2014 - 3:02 AM holdmywetnutz Exactly.. everyone says u will bend a rod you will... Feb 19, 2014 - 7:20 AM kurt95gt Yea you tested an they held but how long was the t... Feb 19, 2014 - 8:40 AM Smaay I thought they would hold that. they are thicker t... Feb 19, 2014 - 8:57 AM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 7:53 PM |