 Wiring Diagram - Urgent Help Needed |
 Feb 22, 2014 - 9:24 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
Anyone know where I can get a full wiring diagram for the MAP sensor for a 1996 Celica GT?
|
 |
Replies
|
Feb 23, 2014 - 2:50 PM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
Thanks for the help guys, I really appreciate it.
My scan tool read the following:  20140222_221153 by SonOfNemesis, on Flickr And the thing is, after I replaced it, it ran good for a few moments and I thought that was that. Well I tried starting the car yesterday and it started up fine but then died. When I finally got it to run on it's own (without having to give it gas), it ran like crap. I checked for vac leaks, tested all fuses and even the fuel pump, fuel sending unit, and the EFI as well. Plugs and wires look good. Cap and rotor are good. I do have arching (tested the coil). After the MAP was replaced, I cleared the memory with my scan tool and the same error screen came back immediately...that threw me off because usually it would take some time before it would do that. Has to be a short right? Trying to decided what to do next... This post has been edited by 6G96GT: Feb 23, 2014 - 2:50 PM |
Posts in this topic
6G96GT Wiring Diagram - Urgent Help Needed Feb 22, 2014 - 9:24 PM
Rusty would it be in here? 6gc repair manual from the st... Feb 23, 2014 - 1:47 AM eMrock32 What is your problem that you need to find the har... Feb 23, 2014 - 10:28 AM eMrock32 Here is the Diag ladder to help you try to find a ... Feb 23, 2014 - 10:37 AM eMrock32 Same code both times? Does your scanner have freez... Feb 23, 2014 - 4:41 PM 6G96GT I'll do what you said and report back. Thanks ... Feb 23, 2014 - 5:04 PM eMrock32 Apparently there isnt a ladder for that code and b... Feb 23, 2014 - 5:08 PM 6G96GT This is really great info, thanks!! I... Feb 23, 2014 - 5:13 PM
eMrock32 One more thing, You should be able to unplug it an... Feb 23, 2014 - 5:15 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 1:35 AM |