![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
Posted up on mr2oc because I see a lot more people there pushing into the higher hp ranges im looking for. Looking to hit around 600-700whp dyno queeen (incase anyone is a member on both sites just looking for as much info as I can get). They are giving me a ton of info over there too. I've read through Manny's build for jim a few times as well as others
Looking for input on suggestions to get up to this power goal, my budget I would like to keep around 10k (not including the new GT or 3rd gen clip). It is flexible but pouring more than that into my $3k shell is painful to think about lol. I realize this post is long to get to the point, what would your swap consist of to achieve my power goal? So I’ll be deployed for 7-8 months making a whole lot of money and when I get back my plan is to find a clean GT and build up a 5SGTE. The car will be a ‘sleeper ‘ for a while as all the money I’m looking to spend will be in the performance department. Eventually the 3s I have now will go into Tina’s car and stay the SSIII look since its clean, and the new GT will get the supra exterior done with more time than a week like I had with my orange celi now. Most likely buy another 3rd gen 3SGTE clip. Mainly for the extra parts, uncut harness, and E153. May keep the extra 3S for replacement parts as they go bad on my other one, or sell it not 100% on anything yet. ATS 2.3L ATS Head ATS Racing has a lot of the parts I would need. Looking at the 2.3L 5S (98+ stroker) block seems to be the strongest 5S block I can find. They have 3S heads as well that are ‘700whp’ tested and mr2 owners seem to swear by ATS so as long as I don’t hear anything bad about them I may as well get one that all the work has already been done on and proven to handle 700. They have cams, gears, turbo setup, injectors ect. But looking into all my options there. Again any input here from experience or knowledge will be greatly appreciated. Ive read mixed reviews on if the 255 Walbro is enough for this hp goal. Also injectors, what should I be running to hit my power goal (600-700). Almost forgot. I know I have E53 here in NC but not sure if I have it back in NY. I would like to run it on pump gas (93 or 100) I realize the e53 makes a huge difference in power, but not sure exactly. As far as the turbo setup, looking at the 6262. It can put out the hp goal im looking for without being the largest turbo ever made. Keep in mind I still want to drive the car, its not a purely track car, but not my DD either. I know some people here like Art swear by the Megasquirt. I know very little about EMS so any info here would be great. I have a performance shop here in NC that has no problem with tuning, and awesome reviews (they’ve done a few mr2 3S’s, so somewhat familiar) . There is a ton of info out there I know that, Im reading as much as I can, but not much time to do it out here in the desert lol Thanks for any info I know this post is extremely long but im pretty committed to doing this, and in my planning stage. I would like to for once do it right the first time ![]() Also my PM box only has like 3% free so reply here. This post has been edited by mgnt232: Mar 11, 2014 - 4:46 PM -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 12, '09 From State College, PA Currently Offline Reputation: 1 (100%) ![]() |
Your priority with 600-700whp should be traction or rather lack-thereof.
If you put the pedal to the floor in just about any gear but fifth with that much power in a fwd car you will be spinning the tires. Im sure others will tell you the same but where I'm at... 2nd is useless with more than 3/4 throttle, and third will even slip a bit with 100% throttle. I expect at the power levels you're looking at you'll have the same issues but with third and fourth gear, and at that point you're over 100mph. Parts look fine and you've done the research to know what you need but getting that power to the ground will be a problem for something meant to be driven on the streets. As far as ecu, Haltec is boss. This post has been edited by cardshark525: Mar 14, 2014 - 5:29 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 11:20 PM |