Installing Riser Blocks troubles, mounts dont match up Options

[RoadRage]

I'm hoping someone with previous experience installing these can help me out please,
I received my risers a few days ago and started working on them today, however after taking the spoiler off I see nothing matches up..

I'm aware the block and the spoiler wont match and new holes need to be drilled,

but the block and the bottom of the car do not match up anywhere, I tried taking photos best I can resting the blocks in position

Here is how the risers look upside down on the spoiler (not mounted)


The riser over hangs over the boot (as they all do, and i took a photos in that gap..


So you can see the mounting hole on the block are like 1cm from the boot

then the mounting hole can be seen on the right from the boot far away from everything


Anyone experience something like this when installing? or am I missing a piece
Any help would be appreciated thanks

[cyberblader1130]

The bottom piece holds 2 nuts fiber glassed in place to match the stock holes. And the wing has 2 holes punched ready to be drilled to match up with the riser blocks upper half. If i didn't have mine on with weather strip sealant and double sided tape i would remove them and show you.