 PCD change from 5x100 to 5x114.3, is it possible with no adaptors? |
 Mar 29, 2014 - 3:58 PM
|
 
|
 Enthusiast  Joined Dec 4, '11 From Greece Currently Offline Reputation: 1 (100%)  |
I'm in the middle of ordering a new set of wheels form Japan.
Problem is: the wheels with the offset I want only comes in 5x114.3  I don't want to use adaptors. So I want to know if the hub of the st205 has enough space for the extra 14+ mm diameter that I'm going to need to drill new holes and put new bolts at the desirable pattern. When I look the hub it seems possible, but I don't know if there is the clearance I need at the inside of it   Anyone here that managed something like that? |
 |
Replies
|
Mar 29, 2014 - 4:32 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
Search 5x114 conversion. This has been covered for the front hubs.
If you have a gt4 the rear conversion has yet to be figured out but I assume you are likely able to use hubs from the same car as the front conversion |
Posts in this topic
underground_design PCD change from 5x100 to 5x114.3 Mar 29, 2014 - 3:58 PM
ILoveMySilly97 Yes it's possible. I'm one of the several ... Mar 29, 2014 - 4:32 PM
ILoveMySilly97 QUOTE (playr158 @ Mar 29, 2014 - 2:3... Mar 29, 2014 - 4:54 PM underground_design That was quick!!!
Thank you for reply... Mar 29, 2014 - 4:54 PM playr158 I've looked at the AWD rav4 and highlander hub... Mar 29, 2014 - 6:12 PM underground_design QUOTE (playr158 @ Mar 29, 2014 - 6:1... Mar 31, 2014 - 3:17 PM Fate QUOTE (playr158 @ Mar 29, 2014 - 7:1... Mar 31, 2014 - 4:58 PM playr158 Fate you rock my world....
how I have to undo the ... Apr 21, 2014 - 12:35 PM Fate QUOTE (playr158 @ Apr 21, 2014 - 1:3... Apr 23, 2014 - 3:51 PM Cuttyman9 I have it done.
Rav4 front hub, 1996-1999 (yes 2... Apr 24, 2014 - 4:42 PM mkernz22 QUOTE (Cuttyman9 @ Apr 24, 2014 - 5... Apr 24, 2014 - 10:37 PM Cuttyman9 Ah fAilWD gotcha.
Use a highlander rear hub. Apr 25, 2014 - 3:53 PM Cuttyman9 I believe you need highlander/rx300 rear hubs and ... Apr 25, 2014 - 4:06 PM underground_design So after several months of waiting , wheels are fi... Jul 16, 2014 - 8:41 AM underground_design after lots of searching and researching I gave up ... Nov 3, 2014 - 4:23 PM mkernz22 How did they add that ring there? I'd be kind ... Nov 3, 2014 - 7:43 PM njccmd2002 id be honest, you have to have balls to use that s... Nov 3, 2014 - 8:48 PM underground_design this machine shop is doing conversions like this e... Nov 5, 2014 - 5:07 PM njccmd2002 can you take pic of the back, from the front it se... Nov 5, 2014 - 10:30 PM luka that's actually not a bad way to do it.
the o... Nov 6, 2014 - 1:50 AM underground_design QUOTE (luka @ Nov 6, 2014 - 1:50 AM)... Nov 11, 2014 - 3:29 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 27th, 2025 - 3:54 PM |