6G Celicas Forums

Welcome Guest ( Log In | Register )

> Celica not starting after head rebuild, I have no crank, head light or radio.
post Apr 8, 2014 - 4:48 PM
+Quote Post
Majorki

Enthusiast

Joined Mar 28, '14
From Australia
Currently Offline

Reputation: 0 (0%)




Hey.
I recently replaced the head gasket on my '96 st204 celica (every thing was working before hand). After I got it all together all I had was hazard lights (no blinkers just on hazard) head lights, horn, dome light, door open light and the air bag light when key turned to on. I had no radio, wipers, dash lights, windows, or anything. I checked all the fuses and ground wires and found the 100a alt fuse was blown, I replaced that and then lost headlights, hazard, dome, door open, and still no crank. BUT I gained blinkers, wipers, dash lights. Still no radio, windows, crank. I checked all the fuses again and they all seem fine (checked them by sight only). I checked if the crank was stuffed but it spins when I give it power, I swaped relays and still nothing. Checked all the grounds again and they seem fine (I fixed up the serface on some). I am perplexed by this, can't figure out what I could have done.

Any and all help would be great.

PS: the guy I bought it off had put in some lights and a sub and who knows what else. Not sure if this would make a difference in this case.
 
Start new topic
Replies
post Apr 8, 2014 - 6:00 PM
+Quote Post
Spider77



Enthusiast
*****
Joined Jan 17, '08
From JB MDL, NJ
Currently Offline

Reputation: 30 (100%)




Did you pull the engine out, or change the gasket with it still in the vehicle?
Reason I'm asking is I had a similar issue when I first pulled mine, but forgot to properly attach the engine bay fuse/relay box all the way (it wasn't locked in), and has some odd issues.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 22nd, 2025 - 6:30 PM