 Oxygen sensor help |
 Apr 18, 2014 - 4:40 PM
|
 
|
|
Enthusiast  Joined Sep 9, '08 From Jamaica Currently Offline Reputation: 1 (100%)  |
Just need a little help id-ing some wires.
The connector for the o2 sensor broke in my hands and now i need to know which wire (harness side) connects to which wire (sensor side), so if anyone could just pull theirs and let me know, that would be awesome. Harness Side: 1. White 2. Black and Yellow 3. Blue and White 4. Brown Sensor Side 1. White 2. Blue 3. Black 4. Black I have tried a few combinations however am tired of blowing my efi (15A) fuse... This post has been edited by Island_Racer: Apr 24, 2014 - 11:19 AM |
 |
Replies
|
Apr 18, 2014 - 9:29 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
the 2 black wires are the heater circuit. they should be pins 1 and 2. the others are the OX signal and ground.
on on the sensor plug, pin 1 is the heater signal back to the ECU. pin 2 is the +B 12V when you turn on the key. so isolate all the wires, turn the key on and find the wire that is giving you 12V pin 3 is the signal wire to the ECU, im not sure if it mates up with the white or blue wire on the sensor plug. Pin 4 is the brown wire, its the ground. -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
Island_Racer Oxygen sensor help Apr 18, 2014 - 4:40 PM
ILoveMySilly97 QUOTE (Island_Racer @ Apr 18, 2014 - 2... Apr 18, 2014 - 5:46 PM
Island_Racer QUOTE (ILoveMySilly97 @ Apr 18, 2014 - 6... Apr 19, 2014 - 1:07 AM Island_Racer QUOTE (Smaay @ Apr 18, 2014 - 10:29 ... Apr 19, 2014 - 1:12 AM Island_Racer ok i figured it out so if anyone needs to know aft... Apr 20, 2014 - 6:28 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 18th, 2025 - 7:27 PM |