 Stripping down a 3sgte transmission |
 May 13, 2014 - 9:28 AM
|
 
|
|
Enthusiast  Joined Apr 19, '08 From Norway Currently Offline Reputation: 0 (0%)  |
I have a complete 3sgte engine still attached to the subframe and transmission, which i have to strip down so i can ship the transmission. I have never done this before, so i just wonder if there is anything i should be aware of. Or if i can simply start pulling things apart. For instance, i dont know what to expect when i detach the motor from the gearbox. Any oil i have to remove? Some pictures or a quick how-to would be greatly appreciated.
I have this:  And i want this: 
This post has been edited by skogs: May 13, 2014 - 9:38 AM |
 |
Replies
|
May 13, 2014 - 10:19 AM
|
|
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
Ah so much fun to be had there.
Really, its just taking things off 1 by 1, and then taking all the bolts from the housing. Try not to wreck the spline. I had my engine set on a hoist, I just lifted it a little bit, and pulled it off by hand. Its heavy, may need some help. |
Posts in this topic
skogs Stripping down a 3sgte transmission May 13, 2014 - 9:28 AM
purplegt4 Gear oil will only come from where the axles are i... May 13, 2014 - 9:39 AM Special_Edy With manual transmissions, once you remove all the... May 13, 2014 - 2:20 PM skogs Thanks a lot, this really helps!
So i should d... May 13, 2014 - 2:50 PM
Smaay dont worry about the spline, its beefy and wont ge... May 13, 2014 - 5:11 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 26th, 2026 - 8:23 PM |