 Stripping down a 3sgte transmission |
 May 13, 2014 - 9:28 AM
|
 
|
|
Enthusiast  Joined Apr 19, '08 From Norway Currently Offline Reputation: 0 (0%)  |
I have a complete 3sgte engine still attached to the subframe and transmission, which i have to strip down so i can ship the transmission. I have never done this before, so i just wonder if there is anything i should be aware of. Or if i can simply start pulling things apart. For instance, i dont know what to expect when i detach the motor from the gearbox. Any oil i have to remove? Some pictures or a quick how-to would be greatly appreciated.
I have this:  And i want this: 
This post has been edited by skogs: May 13, 2014 - 9:38 AM |
 |
Replies
|
May 13, 2014 - 5:11 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
dont worry about the spline, its beefy and wont get damaged. there are several smaller bracket that bolt the AWD trans to the block, so you will have to remove them as well. there is also an oil cooler attached to the trans so you will have to disconnect that. once everything is unbolted they will start to separate. the AWD trans is EFFING HEAVY so watch your toes!!!!
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
skogs Stripping down a 3sgte transmission May 13, 2014 - 9:28 AM
purplegt4 Gear oil will only come from where the axles are i... May 13, 2014 - 9:39 AM rave2n Ah so much fun to be had there.
Really, its just ... May 13, 2014 - 10:19 AM Special_Edy With manual transmissions, once you remove all the... May 13, 2014 - 2:20 PM skogs Thanks a lot, this really helps!
So i should d... May 13, 2014 - 2:50 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 9th, 2025 - 2:01 PM |