6G Celicas Forums

Welcome Guest ( Log In | Register )

> What is the best way to protect bare iron metal from rust?
post Jun 14, 2014 - 10:08 PM
+Quote Post
Langing

Enthusiast
**
Joined Apr 24, '14
From Durham, NC, USA
Currently Offline

Reputation: 0 (0%)




I picked off a steering knuckle from a junkyard Celica, removed the ball joint and wheel bearing, and cleaned it with a wire wheel to the point where it seems rust and yuck free. Now it is almost all bare metal and I have two questions:

1) What is the best/easiest way to remove the remaining rust? (I don't have a sand blaster.)

2) What is a good/long-lasting way to protect the bare metal from rusting again?

To show what I am talking about I include a photo of the newly cleaned SN next to my Celica's SN (the one with with bent ears). The junkyard SN is the lighter of the two, the golden rust colored one; it came from a red 1995 Celica and is going on a white 1994 Celica: rolleyes.gif



Thanks to anyone who takes time to help me by discussing these questions.
 
Start new topic
Replies
post Jun 15, 2014 - 11:46 AM
+Quote Post
njccmd2002



Enthusiast
*****
Joined Mar 15, '07
From Tennessee
Currently Offline

Reputation: 52 (100%)







eastwood.

cheaper in home depot




so many products

in my picture you see the chassis black extreme, chip resistant and brake fluid resistant. powdercoating is better, i dont have tools, nor do i want to pay a lot...


--------------------
Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL

If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in

2grfe Swapped... Why I chose the 2GR, before you ask read here...

A great civilization is not conquered from without until it has destroyed itself from within.


@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
post Jun 15, 2014 - 12:48 PM
+Quote Post
Langing

Enthusiast
**
Joined Apr 24, '14
From Durham, NC, USA
Currently Offline

Reputation: 0 (0%)




QUOTE (njccmd2002 @ Jun 15, 2014 - 12:46 PM) *



eastwood.

cheaper in home depot




so many products

in my picture you see the chassis black extreme, chip resistant and brake fluid resistant. powdercoating is better, i dont have tools, nor do i want to pay a lot...



So many products is right. Spent my morning visiting places, looking for the Deox-C and Eastwood paints. At Home Depot the paint fellow told me they did not carry Eastwood, nor did they have Deox-C, but did have other auto spray paints, most by RUSTOLEUM, and a rust eliminator made by KRUD CUTTER. Didn't buy anything. Went to Advance Auto. They didn't carry Eastwood paints or Deox-C.

While I was asking about rust removers at Advance Auto, I stumbled into a chatty fellow who said that NAVAL JELLY (now owned by LOCTITE) was just the thing I needed. Claimed he had been a mechanic in the air force for a long time and worked on various high performance Jets, including a lot of rust removal, knew that NAVAL JELLY was a very good product, so long as you kept the reaction out of the reach of oxygen by putting the coated parts in a squeezed down zip-lock or equivalent.

Then he went on and identified the more than a dozen classic cars he has bought and restored (including three Porches), but never could bring himself to sell any of them! Offered me the use of his sand blaster whenever I needed! Turns out he lives within a mile of me and spends many hours down as the LKQ junkyard! Maybe we are birds of a feather?. . . maybe an American Eagle and a sparrow. . . biggrin.gif

My wife outside in the Tacoma was waiting on me so I was trying to cut the conversation short (we did have frozen foods in the back), yet I was excited by talking with this guy, so as I was saying good bye to him, I just left the store with the bottle of LOCTITE NAVAL JELLY in my hand, and didn't realize I hadn't paid for it till we were almost home and noticed a police car driving right behind me. rolleyes.gif

Just phoned that branch of Advance Auto and turned myself in!

BTW: Would that "Prep & Etch" phosphoric soln be the best thing for my case, or is the Naval Jelly good enough just before painting? Went and read all the info on the HD website, and it seems like it would do the job, and I have some other, smaller parts that could use what's left of it when I finish.

This post has been edited by Langing: Jun 15, 2014 - 1:10 PM

Posts in this topic
- Langing   What is the best way to protect bare iron metal from rust?   Jun 14, 2014 - 10:08 PM
- - njccmd2002   Dip in phosphorus?.. Powdercoating is best. Go t...   Jun 14, 2014 - 10:58 PM
|- - Langing   QUOTE (njccmd2002 @ Jun 14, 2014 - 11...   Jun 14, 2014 - 11:38 PM
- - njccmd2002   RE: What is the best way to protect bare iron metal from rust?   Jun 14, 2014 - 11:04 PM
- - Box   Coca~Cola=carbonic acid and phosphoric acid. Vine...   Jun 15, 2014 - 12:13 AM
- - Nial   Best thing to do, buy some "bilt hamber Deox ...   Jun 15, 2014 - 2:36 AM
|- - Langing   QUOTE (Nial @ Jun 15, 2014 - 3:36 AM...   Jun 15, 2014 - 9:50 AM
|- - Nial   QUOTE (Langing @ Jun 15, 2014 - 10:5...   Jun 15, 2014 - 11:10 AM
- - Box   The last option is just to move further south.   Jun 15, 2014 - 2:50 AM
|- - Langing   QUOTE (Box @ Jun 15, 2014 - 3:50 AM)...   Jun 15, 2014 - 10:05 AM
|- - Box   QUOTE (Langing @ Jun 15, 2014 - 10:0...   Jun 15, 2014 - 11:42 AM
- - njccmd2002   eastwood. cheaper in home depot so many produ...   Jun 15, 2014 - 11:46 AM
|- - Langing   QUOTE (njccmd2002 @ Jun 15, 2014 - 12...   Jun 15, 2014 - 12:48 PM
|- - Langing   QUOTE (njccmd2002 @ Jun 15, 2014 - 12...   Jun 17, 2014 - 2:44 PM
- - Box   Well. as long as you didn't take $50+ wor...   Jun 15, 2014 - 3:00 PM
|- - Langing   QUOTE (Box @ Jun 15, 2014 - 4:00 PM)...   Jun 15, 2014 - 4:38 PM
- - Box   According to the instructions you rinse or wipe it...   Jun 15, 2014 - 6:11 PM
|- - Langing   QUOTE (Box @ Jun 15, 2014 - 7:11 PM)...   Jun 15, 2014 - 6:54 PM
- - Special_Edy   Rust converting primer is available at most autopa...   Jun 16, 2014 - 1:17 AM
- - njccmd2002   if lighting strikes, it wont strike the hub, it wi...   Jun 17, 2014 - 6:19 PM
|- - Langing   QUOTE (njccmd2002 @ Jun 17, 2014 - 7...   Jun 18, 2014 - 8:39 AM
- - njccmd2002   RE: What is the best way to protect bare iron metal from rust?   Jun 18, 2014 - 5:40 PM
- - Langing   I know, but I'm learning. It's so exciting...   Jun 18, 2014 - 5:53 PM
- - Special_Edy   I never understood how people can believe that lig...   Jun 20, 2014 - 10:56 PM
|- - Langing   QUOTE (Special_Edy @ Jun 20, 2014 - 11...   Jun 21, 2014 - 8:59 AM
|- - Langing   QUOTE (Special_Edy @ Jun 20, 2014 - 11...   Jun 21, 2014 - 9:38 AM
- - Special_Edy   Addressing your concerns, 1. Paint is the best ba...   Jun 21, 2014 - 10:57 AM
|- - Langing   QUOTE (Special_Edy @ Jun 21, 2014 - 11...   Jun 21, 2014 - 11:10 AM
- - Special_Edy   Im sure factory they didnt but I had them fall out...   Jun 21, 2014 - 7:05 PM
|- - Langing   QUOTE (Special_Edy @ Jun 21, 2014 - 8...   Jun 30, 2014 - 5:46 AM
- - rollingsevens77   red oxide is the best way to protect bare metal as...   Jun 30, 2014 - 2:09 AM
|- - Langing   QUOTE (rollingsevens77 @ Jun 30, 2014 - ...   Jun 30, 2014 - 6:07 AM
- - njccmd2002   hes from australia. red oxide might be a product t...   Jun 30, 2014 - 7:23 AM
- - Langing   QUOTE (njccmd2002 @ Jun 30, 2014 - 8...   Jun 30, 2014 - 9:42 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 21st, 2025 - 7:17 PM