 Remanufactured Head (ebay), Need you all experts advise |
 Jun 13, 2014 - 8:08 AM
|
 
|
 Enthusiast  Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%)  |
In the near future, I plan on redoing the valves etc on the head and came across some ebay sites that sells remanufactured heads. all work done with cams etc for under $300. Engine is 7A-FE and my car is 1996 Celica ST (AT-200) with manual transmission.
What is your experience with these heads and what advise you can give me that can help me decide. Thank You MSK This post has been edited by msk59: Jun 13, 2014 - 8:09 AM |
 |
Replies
|
Jun 16, 2014 - 1:20 PM
|
|
|
Enthusiast Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) |
Yes that is my worry too. The tricks of the trade and the 'short cuts' they used is the key. I will pull the head myself and will have a knowledgeable buddy with me who will help me. I also want to do the piston re-ring. That would be a challange laying on the ground and unbolting it from underneath.
The other option would be to pull the engine out of the car along with transmission and replace the clutch as well. It definetly involves additional work but the benefits are many as well. |
Posts in this topic
msk59 Remanufactured Head (ebay) Jun 13, 2014 - 8:08 AM
Langing QUOTE (msk59 @ Jun 13, 2014 - 9:08 A... Jun 13, 2014 - 8:04 PM VavAlephVav you can find a used head with maybe 150k on it at ... Jun 13, 2014 - 11:59 PM Smaay with cams? yeah i highly doubt that. I dont know w... Jun 14, 2014 - 1:01 AM msk59 here is the link.
http://www.ebay.com/itm/TOYOTA-... Jun 14, 2014 - 6:47 AM Special_Edy For that price or less you could have your origina... Jun 14, 2014 - 11:36 PM msk59 I have not checked the local shops here yet so I w... Jun 15, 2014 - 12:01 AM VavAlephVav when I searched for 'cylinder heads' on go... Jun 15, 2014 - 7:22 PM
Special_Edy QUOTE (VavAlephVav @ Jun 15, 2014 - 7... Jun 15, 2014 - 7:51 PM msk59 Special Edy: You make a very good point in terms o... Jun 15, 2014 - 9:44 PM VavAlephVav This is the same boat I'm in. I could manage t... Jun 16, 2014 - 11:34 AM VavAlephVav I should add that in the past I thought I was bett... Jun 16, 2014 - 11:40 AM Langing QUOTE (msk59 @ Jun 16, 2014 - 2:20 P... Jun 16, 2014 - 9:29 PM msk59 Langing. I did read the entire post, a few times ... Jun 16, 2014 - 9:53 PM Langing QUOTE (msk59 @ Jun 16, 2014 - 10:53 ... Jun 17, 2014 - 7:42 AM msk59 LOL. I never read 'Gone with the wind' nor... Jun 17, 2014 - 7:56 AM VavAlephVav the first book I ever read was the uncut version o... Jun 17, 2014 - 8:45 AM Langing QUOTE (VavAlephVav @ Jun 17, 2014 - 9... Jun 17, 2014 - 9:41 AM VavAlephVav Well, we have this little tire shop and the old gu... Jun 17, 2014 - 10:51 AM Langing QUOTE (VavAlephVav @ Jun 17, 2014 - 11... Jun 17, 2014 - 2:21 PM msk59 Never read that one either. I used to watch too m... Jun 17, 2014 - 10:58 AM Langing QUOTE (msk59 @ Jun 17, 2014 - 11:58 ... Jun 17, 2014 - 1:53 PM Special_Edy QUOTE (Langing @ Jun 17, 2014 - 1:53... Jun 30, 2014 - 11:36 AM Special_Edy I got a 5S from a 93 Camry with 163k in the junkya... Jun 21, 2014 - 7:26 PM Langing QUOTE (Special_Edy @ Jun 21, 2014 - 8... Jun 21, 2014 - 7:46 PM Special_Edy Yeah you just need more parts. Some of the electro... Jun 22, 2014 - 12:42 AM Langing QUOTE (Special_Edy @ Jun 22, 2014 - 1... Jun 22, 2014 - 8:55 AM Special_Edy The 5sfe isnt worth the trouble.
Maybe a 4age If y... Jun 22, 2014 - 2:43 PM Syaoran QUOTE (Special_Edy @ Jun 22, 2014 - 3... Jun 30, 2014 - 1:59 AM msk59 Soooo back to my original question: Are the afterm... Jun 30, 2014 - 6:54 PM Langing QUOTE (msk59 @ Jun 30, 2014 - 7:54 P... Jul 1, 2014 - 7:55 AM VavAlephVav You can add a poll if you go back and edit the ori... Jul 1, 2014 - 10:22 AM msk59 OK here is my situation, which may or may not diff... Jul 1, 2014 - 12:51 PM Langing QUOTE (msk59 @ Jul 1, 2014 - 1:51 PM... Jul 1, 2014 - 2:46 PM VavAlephVav To me the rebuilt head is just as good as a head t... Jul 1, 2014 - 1:20 PM Langing QUOTE (VavAlephVav @ Jul 1, 2014 - 2... Jul 1, 2014 - 3:12 PM Special_Edy Whats the shipping on a cylinder head? Do you have... Jul 1, 2014 - 2:46 PM Langing QUOTE (Special_Edy @ Jul 1, 2014 - 3... Jul 1, 2014 - 2:51 PM Special_Edy Three angle valve job; lap the valves in; check th... Jul 1, 2014 - 3:57 PM Langing QUOTE (Special_Edy @ Jul 1, 2014 - 4... Jul 1, 2014 - 7:49 PM Special_Edy QUOTE (Langing @ Jul 1, 2014 - 8:49 ... Jul 2, 2014 - 12:14 AM Langing QUOTE (Special_Edy @ Jul 2, 2014 - 1... Jul 2, 2014 - 11:51 AM VavAlephVav Ya i'd say a 'rebuilt head' doesn... Jul 1, 2014 - 5:03 PM msk59 http://www.shop.headsonly.com/TOYOTA-CELIC...CELIC... Jul 1, 2014 - 10:31 PM msk59 Langing: i spoke to a guy named David from Cylinde... Jul 2, 2014 - 8:36 AM Langing QUOTE (msk59 @ Jul 2, 2014 - 9:36 AM... Jul 2, 2014 - 10:32 AM msk59 thanks Langing. I just spoke to a mechanic who is ... Jul 2, 2014 - 10:51 AM Langing QUOTE (msk59 @ Jul 2, 2014 - 11:51 A... Jul 2, 2014 - 1:38 PM VavAlephVav There you go, the most important thing is to find ... Jul 2, 2014 - 11:06 AM Langing QUOTE (VavAlephVav @ Jul 2, 2014 - 12... Jul 2, 2014 - 1:44 PM VavAlephVav To me that is the most important reason to not buy... Jul 2, 2014 - 1:55 PM Langing QUOTE (VavAlephVav @ Jul 2, 2014 - 2... Jul 2, 2014 - 2:24 PM Special_Edy You can remove the exhaust camshaft on the 5s, pos... Jul 2, 2014 - 5:12 PM msk59 Thanks to all for their input. I think the strong ... Jul 24, 2014 - 11:02 AM Langing QUOTE (msk59 @ Jul 24, 2014 - 12:02 ... Jul 24, 2014 - 11:40 AM msk59 I am planning on it. I was going to start last wee... Jul 24, 2014 - 11:55 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 22nd, 2025 - 8:48 AM |