 apexi avcr help |
 Jun 29, 2014 - 12:50 AM
|
 
|
 Enthusiast  Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%)  |
installed an avcr today. everything seems to be wired properly. throttle reads open and closed on the unit, however the engine flutters at 2000 rpms. I'm not sure what is wrong. air fuel is rich and vacuum doesn't really move from 22 in/hg. any input is appreciated
-------------------- |
 |
Replies
|
Jun 30, 2014 - 3:43 PM
|
|
 Enthusiast Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) |
What settings did you use?
-------------------- |
|
Jun 30, 2014 - 6:32 PM
|
|
|
Enthusiast Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) |
Didn't even get that far. I plumped it as follow.
1. Turbo compressor wheel to "no" port on solenoid 2. Wastegate to "com" port 3. Plugged the wastegate to vsv port 4. Jumped the green boost solenoid (back of manifold) on the vsv system 5. Apexi map sensor is tapped into boost gauge line on intake manifold Wiring 1. Red is power into ignition fuse 2. Green and black to body ground 3. Purple into injector 1 on the ecu (plug e4 pin 12) 4. White to speed sensor on the ecu (plug e6 pin 9) 5. Gray to vta (plug e5 pin11) pink and black; goes to tps Did I do anything wrong with install? -------------------- |
Posts in this topic
garin apexi avcr help Jun 29, 2014 - 12:50 AM
Smaay AVCR is a boost controller, not a tuner like the S... Jun 30, 2014 - 2:22 PM
garin I am very well aware of this! That is why I am... Jun 30, 2014 - 3:39 PM Nial Everything with the install looks okay apart from ... Jul 1, 2014 - 12:27 AM garin QUOTE (Nial @ Jul 1, 2014 - 1:27 AM)... Jul 1, 2014 - 5:26 AM Nial These should get you underway, they will need adju... Jul 1, 2014 - 7:10 AM garin I didn't see a "spd 5" option... Any... Jul 1, 2014 - 8:39 AM Nial If there isn't an option for it, then I guess... Jul 1, 2014 - 8:49 AM garin QUOTE (Nial @ Jul 1, 2014 - 9:49 AM)... Jul 1, 2014 - 8:57 AM Nial Good stuff, I look forward to your next pist! Jul 1, 2014 - 11:09 AM garin Everything seems to read and respond properly. The... Aug 23, 2014 - 8:50 PM Nial QUOTE (garin @ Aug 23, 2014 - 9:50 P... Aug 24, 2014 - 2:36 AM garin To save the setting I must go to the "7. Init... Aug 24, 2014 - 10:14 AM Nial QUOTE (garin @ Aug 24, 2014 - 11:14 ... Aug 24, 2014 - 11:25 AM garin figured it out! "initialize yes" res... Aug 24, 2014 - 1:43 PM Nial No bother bud, glad it's all fixed and working... Aug 24, 2014 - 4:23 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 16th, 2025 - 7:06 AM |