 apexi avcr help |
 Jun 29, 2014 - 12:50 AM
|
 
|
 Enthusiast  Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%)  |
installed an avcr today. everything seems to be wired properly. throttle reads open and closed on the unit, however the engine flutters at 2000 rpms. I'm not sure what is wrong. air fuel is rich and vacuum doesn't really move from 22 in/hg. any input is appreciated
-------------------- |
 |
Replies
|
Jul 1, 2014 - 12:27 AM
|
|
 Enthusiast Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) |
Everything with the install looks okay apart from possibly the earth, they have to go close together on an earth wire to the ECU, something like within two inches of each other but not soldered together, and pretty close to the actual ECU.......if that's how you did it then that's fine.
But, you need to set it up before you run the car. I don't know if you can follow this link. http://www.gt4oc.net/forums/download/file.php?id=19999 I will try and copy And paste it here later on today if nobody else does, it will give you all the settings you need for a basic set up, it will need further tweaking to get it perfect for your car etc but it's a good start. This post has been edited by Nial: Jul 1, 2014 - 12:30 AM -------------------- |
Posts in this topic
garin apexi avcr help Jun 29, 2014 - 12:50 AM
Smaay AVCR is a boost controller, not a tuner like the S... Jun 30, 2014 - 2:22 PM
garin I am very well aware of this! That is why I am... Jun 30, 2014 - 3:39 PM Nial What settings did you use? Jun 30, 2014 - 3:43 PM garin Didn't even get that far. I plumped it as foll... Jun 30, 2014 - 6:32 PM garin QUOTE (Nial @ Jul 1, 2014 - 1:27 AM)... Jul 1, 2014 - 5:26 AM Nial These should get you underway, they will need adju... Jul 1, 2014 - 7:10 AM garin I didn't see a "spd 5" option... Any... Jul 1, 2014 - 8:39 AM Nial If there isn't an option for it, then I guess... Jul 1, 2014 - 8:49 AM garin QUOTE (Nial @ Jul 1, 2014 - 9:49 AM)... Jul 1, 2014 - 8:57 AM Nial Good stuff, I look forward to your next pist! Jul 1, 2014 - 11:09 AM garin Everything seems to read and respond properly. The... Aug 23, 2014 - 8:50 PM Nial QUOTE (garin @ Aug 23, 2014 - 9:50 P... Aug 24, 2014 - 2:36 AM garin To save the setting I must go to the "7. Init... Aug 24, 2014 - 10:14 AM Nial QUOTE (garin @ Aug 24, 2014 - 11:14 ... Aug 24, 2014 - 11:25 AM garin figured it out! "initialize yes" res... Aug 24, 2014 - 1:43 PM Nial No bother bud, glad it's all fixed and working... Aug 24, 2014 - 4:23 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 8th, 2025 - 1:37 AM |