apexi avcr help Options

[garin]

installed an avcr today. everything seems to be wired properly. throttle reads open and closed on the unit, however the engine flutters at 2000 rpms. I'm not sure what is wrong. air fuel is rich and vacuum doesn't really move from 22 in/hg. any input is appreciated

[Nial]

These should get you underway, they will need adjusting to suit your car.

Apex-i AVC-R settings for 0.9 Bar and 1.1 bar

BASIC SETTINGS

Setting [A] 0.9 Bar

Boost /Duty Cycle
Bst = 0.90kg/cm2
Duty = 52%

NE Point
NE1 = 3000
NE2 = 3500
NE3 = 4000
NE4 = 4500
NE5 = 5000
NE6 = 5500
NE7 = 6000
NE8 = 6500

F/B Speed
1S = 5
2N = 5
3R = 5
4T = 5
5T = 5

Learn Gear
1S = x
2N = x
3R = x
4T = x
5T = x

Start Duty
1st = 5%
2nd = 1%







Setting [B] 1.1 Bar

Boost /Duty Cycle
Bst = 1.10kg/cm2
Duty = 60%

NE Point
NE1 = 3000
NE2 = 3500
NE3 = 4000
NE4 = 4500
NE5 = 5000
NE6 = 5500
NE7 = 6000
NE8 = 6500

F/B Speed
1S = 5
2N = 5
3R = 5
4T = 5
5T = 5

Learn Gear
1S = x
2N = x
3R = x
4T = x
5T = x

Start Duty
1st = 6%
2nd = 2%










Etc settings

Car Select
Cyl = 4
Spd = 5
Throttle = / (arrow pointing up to the right)

Sensor Select
Number one (1)

Gear Jdge
1st = 120
2nd = 075
3rd = 050
4th = 035
5th = 025
N/S = 255

Graph Scale
BS = 2.0kg/cm2
Ne = 8000 RPM
Sp = 300km/h

Monitor
2 Channel

1 Bst
2 Rev

You can set the Monitor to whatever you want and display any information you choose from 1 to 4 different types of information