Remanufactured Head (ebay), Need you all experts advise Options

[msk59]

In the near future, I plan on redoing the valves etc on the head and came across some ebay sites that sells remanufactured heads. all work done with cams etc for under $300. Engine is 7A-FE and my car is 1996 Celica ST (AT-200) with manual transmission.

What is your experience with these heads and what advise you can give me that can help me decide.

Thank You
MSK

This post has been edited by msk59: Jun 13, 2014 - 8:09 AM

[msk59]

http://www.shop.headsonly.com/TOYOTA-CELIC...CELICA-7AFE.htm
here is the link of one re builder. and here is the description of what work is done to the head:

This listing is for a rebuilt Toyota Celica 7AFE cylinder head for the years 1993-1997. For other models see our store listings. This head is completely rebuilt. It has been pressure checked for cracks and resurfaced. Guides and seats have been replaced as needed. New VITON valve stem seals have been installed. All heads are given a three angle valve job. All valves have been vacuum checked to ensure proper sealing.

In terms of how long it will take to rebuild the head, Here is a video link I found that will give you an idea of what has been done. this will give you an idea of how the head is pulled out and how the piston rings are cleaned and replaced:

http://www.youtube.com/watch?v=c_ASGwWtrxE

Music is annoying LOL.