 Help!! Smoking like its no tomorrow!, I need help to figure out what it is and how to fix it.. |
 Jul 4, 2014 - 9:27 AM
|
 
|
 Enthusiast  Joined Nov 25, '13 From Norway Currently Offline Reputation: 0 (0%)  |
Hello.
Sorry for my bad english  My 7afe have been smoking blue smoke for some time now.. and the smell of oil is present almost all time (USE ALOT OF OIL!)... It smokes never when idle, only when i give it some trotle. i have been thinking it may be the Valve seals, but it might be the piston rings aswell... what is your opinion? |
 |
Replies
|
Jul 16, 2014 - 4:37 AM
|
|
|
Enthusiast Joined Nov 25, '13 From Norway Currently Offline Reputation: 0 (0%) |
The valves ar now reseated and new valve seals are in place
 And valves are in place whit the liftersDid the exhaust side first  Then the Exhaust valves  Then the Innlet side whit valves   And now the valve lifters  Used lots of oil!! Tools i used to fit the valves  Must say the valve keepers vas a pain at first, but when i got in the groove it was easy Sorry Msk that i dint show how i reseated the valves and how i cleaned the head. This post has been edited by Tort1llaboy: Jul 16, 2014 - 4:36 AM |
Posts in this topic
Tort1llaboy Help!! Smoking like its no tomorrow! Jul 4, 2014 - 9:27 AM
Special_Edy Piston rings most likely. You can try to do a pist... Jul 4, 2014 - 11:03 AM Tort1llaboy i have done a compresion test and all the sylinder... Jul 4, 2014 - 11:30 AM lagos A good way to tell if its your valve stem seals is... Jul 4, 2014 - 12:09 PM enderswift compression rings might be alright, oil scraper ri... Jul 4, 2014 - 12:10 PM Tort1llaboy Looks like a long weekend for me any one knows th... Jul 4, 2014 - 12:17 PM VavAlephVav engine/transmission stickys
http://www.6gc.net/fo... Jul 4, 2014 - 1:03 PM Tort1llaboy dint find the size. but i got them the hard way f... Jul 4, 2014 - 1:19 PM Tort1llaboy The order list is put in then
New piston rings,
... Jul 4, 2014 - 3:13 PM Box The 7A is NOTORIOUS for burning oil due to stuck r... Jul 4, 2014 - 4:02 PM
Tort1llaboy QUOTE (Box @ Jul 4, 2014 - 5:02 PM) ... Jul 7, 2014 - 5:06 AM Special_Edy O2 sensors and catalytic converters dont like oil Jul 4, 2014 - 8:39 PM Box QUOTE (Special_Edy @ Jul 4, 2014 - 8... Jul 4, 2014 - 9:06 PM Bitter QUOTE (Box @ Jul 4, 2014 - 9:06 PM) ... Jul 5, 2014 - 2:06 PM Box If he can get it to where there's no visible s... Jul 4, 2014 - 9:02 PM Box Take it out and clean it once a month if it still ... Jul 5, 2014 - 2:28 PM VavAlephVav is burning a Quart per 1000 miles really within to... Jul 5, 2014 - 2:50 PM Box QUOTE (VavAlephVav @ Jul 5, 2014 - 2... Jul 5, 2014 - 3:33 PM Special_Edy Its burning it in the combustion chamber which wil... Jul 5, 2014 - 3:18 PM Box Ahh, see where I live they don't have emission... Jul 7, 2014 - 7:38 AM Tort1llaboy QUOTE (Box @ Jul 7, 2014 - 7:38 AM) ... Jul 7, 2014 - 4:47 PM VavAlephVav always use new bolts. at least that is the manufac... Jul 7, 2014 - 7:34 PM Box If it's valve stem seals anyway and not rings.... Jul 7, 2014 - 8:24 PM Tort1llaboy I have a new timing belt for it aswell
was chekin... Jul 8, 2014 - 8:55 AM Special_Edy If your valve stem seals were leaking it would puf... Jul 8, 2014 - 11:34 AM Tort1llaboy yeah i have tools to do that just need the time..... Jul 8, 2014 - 11:50 AM Box Valve stem seals can leak severely while running t... Jul 8, 2014 - 1:37 PM Tort1llaboy the problem is that it have been doing this for ov... Jul 8, 2014 - 3:06 PM Box What happens with the rings is that the oil contro... Jul 8, 2014 - 3:44 PM Tort1llaboy QUOTE (Box @ Jul 8, 2014 - 3:44 PM) ... Jul 8, 2014 - 5:31 PM Box Do you have Seafoam available in stores? If so bu... Jul 8, 2014 - 10:30 PM Special_Edy QUOTE (Box @ Jul 8, 2014 - 10:30 PM)... Jul 9, 2014 - 10:31 AM Box Yeah, I forgot to mention removing the EFI fuse an... Jul 9, 2014 - 11:51 AM Special_Edy I wonder if carb cleaner would be good to use. Its... Jul 9, 2014 - 12:51 PM Box Everything would probably flash rust like a son of... Jul 9, 2014 - 1:20 PM Special_Edy QUOTE (Box @ Jul 9, 2014 - 2:20 PM) ... Jul 9, 2014 - 2:41 PM Box MMO and Seafoam is used in oil and fuel, so I don... Jul 9, 2014 - 4:58 PM Special_Edy QUOTE (Box @ Jul 9, 2014 - 5:58 PM) ... Jul 9, 2014 - 5:21 PM Box They're kind of both. Jul 9, 2014 - 9:19 PM Tort1llaboy I tryed the piston soak and it dint work... so now... Jul 10, 2014 - 11:55 AM Box QUOTE (Tort1llaboy @ Jul 10, 2014 - 11... Jul 10, 2014 - 3:12 PM msk59 I will be starting to re-ring and headwork on my 9... Jul 10, 2014 - 12:57 PM Tort1llaboy QUOTE (msk59 @ Jul 10, 2014 - 12:57 ... Jul 10, 2014 - 1:11 PM msk59 Thanks. I have not opened the engine yet. I have b... Jul 10, 2014 - 2:56 PM Tort1llaboy are u rebuilding the engine or just the head? Jul 10, 2014 - 2:58 PM msk59 I will take the head off and get it checked by a m... Jul 10, 2014 - 3:05 PM Tort1llaboy smart move... u might aswell change all the bearin... Jul 10, 2014 - 3:11 PM Special_Edy The head will get cleaned when you have it resurfa... Jul 10, 2014 - 4:56 PM Box Bore and stroke it while you're at it. Jul 10, 2014 - 5:35 PM Special_Edy QUOTE (Box @ Jul 10, 2014 - 6:35 PM)... Jul 10, 2014 - 7:30 PM Box QUOTE (Special_Edy @ Jul 10, 2014 - 7... Jul 10, 2014 - 8:20 PM VavAlephVav Actually Smoking is not such a bad thing after all... Jul 10, 2014 - 8:08 PM msk59 Thank You all for wonderful help and tips. This is... Jul 10, 2014 - 10:11 PM Tort1llaboy But abote the head bolts, i have spokent to a Toyo... Jul 11, 2014 - 1:44 AM Box I always use new head bolts, you're already sp... Jul 11, 2014 - 12:44 PM Tort1llaboy QUOTE (Box @ Jul 11, 2014 - 12:44 PM... Jul 11, 2014 - 1:04 PM Tort1llaboy i havent looked that good at the cylinders.
focus... Jul 11, 2014 - 1:20 PM Box Try finding a hardware store that has a large sele... Jul 11, 2014 - 3:16 PM Tort1llaboy QUOTE (Box @ Jul 11, 2014 - 4:16 PM)... Jul 11, 2014 - 3:26 PM Box Try looking around the internet for information. ... Jul 11, 2014 - 5:17 PM Tort1llaboy QUOTE (Box @ Jul 11, 2014 - 6:17 PM)... Jul 11, 2014 - 7:31 PM Box Wooo! Jul 11, 2014 - 8:53 PM VavAlephVav when you test the head for warpage you put a metal... Jul 11, 2014 - 10:58 PM msk59 Very valuable information here in this thread. Edd... Jul 11, 2014 - 11:10 PM VavAlephVav the shop that's going to do mine is nervous th... Jul 12, 2014 - 8:24 AM Box Psssh, find a BEAMS or 1MZ to throw in there. Jul 12, 2014 - 10:01 AM Special_Edy All you need is a celica oil pan and oil pump pick... Jul 12, 2014 - 11:16 AM Tort1llaboy How do i upload pics? Jul 12, 2014 - 5:26 PM VavAlephVav you need to upload them to a photobucket account, ... Jul 12, 2014 - 6:54 PM Tort1llaboy this is what i figured of the valve seals Jul 12, 2014 - 7:35 PM Tort1llaboy So far so good Jul 14, 2014 - 9:52 AM msk59 Excellent but more pictures and description, any t... Jul 14, 2014 - 10:43 AM msk59 No worries, thanks what chemical you used to make... Jul 16, 2014 - 7:29 AM Tort1llaboy u can get the engine whit transmision out in abote... Jul 16, 2014 - 9:08 AM Special_Edy Some tips-
Did you lap the valves before reinstall... Jul 16, 2014 - 11:48 AM Box +1 on engine assembly lube, valve lapping and orde... Jul 16, 2014 - 12:09 PM VavAlephVav There are several bids on YouTube showing how to l... Jul 16, 2014 - 12:14 PM Tort1llaboy yeah i lap/reaseated the valves. and i keept the v... Jul 16, 2014 - 12:26 PM Box The assembly lube stays on the parts unlike regula... Jul 16, 2014 - 2:05 PM Tort1llaboy yeah that what we found out. Molycoat its called t... Jul 16, 2014 - 2:49 PM Box I've always used it. Besides you change the o... Jul 16, 2014 - 2:56 PM Special_Edy On top of that a capful of oil in each cylinder an... Jul 16, 2014 - 3:41 PM Box Yep. Then cross your fingers and hope it doesn... Jul 16, 2014 - 3:52 PM Tort1llaboy now im just waiting for the main rod bearings and ... Jul 16, 2014 - 4:54 PM Tort1llaboy Soon done whit the engine. Tought u guys liked a u... Jul 24, 2014 - 5:13 PM Box Wooo, cleanliness. Jul 24, 2014 - 8:20 PM msk59 What chemicals did you use to clean the pistons? Jul 24, 2014 - 9:16 PM Tort1llaboy QUOTE (msk59 @ Jul 24, 2014 - 10:16 ... Jul 25, 2014 - 5:47 AM Box Kerosene is another good cleaner. Jul 25, 2014 - 1:02 PM Bitter It would not hurt at all to add a couple extra oil... Jul 25, 2014 - 11:22 PM Tort1llaboy QUOTE (Bitter @ Jul 26, 2014 - 12:22... Jul 26, 2014 - 10:15 AM msk59 What size socket to use on the head bolts 12 mm or... Jul 29, 2014 - 12:11 AM VavAlephVav I think the head bolts themselves are Star tool so... Jul 29, 2014 - 9:24 AM msk59 I had a call in to my local Toyota dealer and they... Jul 29, 2014 - 12:58 PM Tort1llaboy QUOTE (msk59 @ Jul 29, 2014 - 12:58 ... Jul 30, 2014 - 6:49 AM Special_Edy Normally a 12 point socket allows twice as many an... Jul 29, 2014 - 3:20 PM msk59 Well: Pulled the head last night and no problems. ... Jul 30, 2014 - 8:01 AM Tort1llaboy QUOTE (msk59 @ Jul 30, 2014 - 8:01 A... Jul 30, 2014 - 9:39 AM msk59 Yes, this car came with AC, power steering but no ... Jul 30, 2014 - 12:16 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 11:37 AM |