Jul 18, 2014 - 1:46 AM
|
|
|
Enthusiast ![]() Joined Jul 5, '12 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
Hi guys,
I've decided that I'm keeping my Celica (st204) and will very likely be looking at doing an engine swap. I was thinking a beams red top but then it seems like a 3sgte will be the easier option from what I've read. I've read that the standard 5SFE manual tranny should handle it but I did see conflicting posts on this. I'm planning on keeping it as a daily driver and just wanted something a bit quicker. Has anyone in Sydney, Australia done this swap before and know a shop that has done the job before? There's an ST205 half cut for sale at the moment but I won't have the cash for another few months, as I'm planning on installing coilovers and a few other things in the coming months before finding someone to do the swap. Thanks |
![]() |
Jul 18, 2014 - 9:56 PM
|
|
|
Enthusiast ![]() Joined Jul 5, '12 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
I'd actually prefer the BEAMS as it's going to stay my daily driver, there'll likely be less issues. But so far it looks like it'll be a pain to find a front cut.
But the 3SGTE might be the better option as I'd probably end up trying to squeeze a bit more out of the BEAMS, where I could leave the 3SGTE pretty much stock and have a huge gain over my current setup. I guess time when the time comes and the cash is ready I'll go for what's available at the time. To be clear, I'm not planning on a GT4 replica of any sort. I'll be going more for the SS-III look, though if I end up with the turbo I wouldn't say no to the GT4 front bumper I did consider the V6 swap but the it seemed like it would be too much extra effort. |
wogstaa Need Some Engine Swap Advice Jul 18, 2014 - 1:46 AM
Box The BEAMS has less involved, but the 3S-GTE has mo... Jul 18, 2014 - 11:30 AM
njccmd2002 or... Jul 18, 2014 - 2:18 PM
Box Yeah, I was going to suggest a V6 but I wasn't... Jul 18, 2014 - 6:54 PM
njccmd2002 they have supercharged aurions Jul 18, 2014 - 7:42 PM
Box That's even better then. Definitely one of th... Jul 18, 2014 - 8:53 PM
cardshark525 Regardless of which route you go, since you're... Jul 18, 2014 - 8:58 PM
richee3 You don't need a front clip for a BEAMS, just ... Jul 18, 2014 - 10:00 PM
wogstaa The reason I want the clip is for the extra bits l... Jul 18, 2014 - 10:40 PM
richee3 The swap itself isn't much more difficult yet ... Jul 18, 2014 - 11:57 PM
Box QUOTE (richee3 @ Jul 18, 2014 - 11:5... Jul 19, 2014 - 1:06 AM
Rusty Whats your state laws/rules about engine swaps the... Jul 19, 2014 - 12:49 AM
wogstaa QUOTE (Rusty @ Jul 19, 2014 - 3:49 P... Jul 19, 2014 - 1:18 AM
wogstaa So, they've changed the laws here but it looks... Jul 26, 2014 - 9:39 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 29th, 2026 - 12:13 AM |