 Hyper flash |
 Sep 10, 2014 - 11:19 PM
|
 
|
|
Enthusiast  Joined Oct 11, '13 From 103062 Currently Offline Reputation: 0 (0%)  |
i got some leds but it hyoer flashes now i could buy the resistor but i hear about i fuse or relay not sure and not sure which one it is
|
 |
Replies
|
Sep 12, 2014 - 6:16 PM
|
|
 Enthusiast Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) |
I have LED's all around and my Flasher Relay just buzzes whenever I use the turn stalk.
No rapid flashing for me... Rapid flashing I could live with... 
-------------------- |
|
Sep 13, 2014 - 12:24 AM
|
|
|
Enthusiast Joined Jul 1, '14 From Hawaii Currently Offline Reputation: 3 (100%) |
QUOTE (KAOS @ Sep 12, 2014 - 7:16 PM)  I have LED's all around and my Flasher Relay just buzzes whenever I use the turn stalk. No rapid flashing for me... Rapid flashing I could live with... Excuse my language... But your load is too small...  Now that thats out of the way. The LEDs draw way too little current so it thinks that it has NO BULBS AT ALL and you actually don't have to spend any extra money to fix it. Just take apart the dashboard and pull out the relay. There is a piece of metal soldered on there. unsolder it, and grab some 220 grit sand paper. place it on its side, and sand it down to about 3/4 the thickness it was, solder it back on, and then test it out. if you get a hyper flash, take it out, unsolder and sand it down a more Once you don't have the hyper flash, the resistance is set so that when bulb goes out, you'll get a hyper flash. BUT heres the catch! this is only going to work for LEDs now, so if you want to switch back to regular bulbs, you won't be able to tell if one is out!  I can post a link to a tutorial later if you want, but I'm too lazy to find it right now
|
Posts in this topic
Yoni502 Hyper flash Sep 10, 2014 - 11:19 PM
msk59 I just changed turn signal bulbs to LEDs (Pilot Br... Sep 11, 2014 - 8:02 AM KAOS Hells yes, I'll take the link!
I've be... Sep 13, 2014 - 1:14 AM
Noahwhite2014 QUOTE (KAOS @ Sep 13, 2014 - 1:14 AM... Sep 13, 2014 - 4:56 AM Nemises QUOTE (Yoni502 @ Sep 11, 2014 - 5:19... Oct 4, 2014 - 9:55 PM KAOS So I bought a new relay, rated for use with LED... Oct 14, 2014 - 10:54 PM Noahwhite2014 QUOTE (KAOS @ Oct 14, 2014 - 10:54 P... Oct 14, 2014 - 11:02 PM KAOS QUOTE (Noahwhite2014 @ Oct 14, 2014 - 10... Oct 20, 2014 - 1:59 PM Noahwhite2014 QUOTE (KAOS @ Oct 20, 2014 - 1:59 PM... Oct 20, 2014 - 2:31 PM KAOS I should elaborate.
With the "LED Relay... Oct 14, 2014 - 11:48 PM KAOS Any progress with this? Sorry to hear about the hu... Oct 30, 2014 - 2:14 PM KAOS Hold on, after speaking with SBL tech support, it ... Oct 30, 2014 - 2:50 PM KAOS For the record; CF13GL-02 is the correct relay to ... Dec 8, 2014 - 10:50 AM AustenJoe12 I apologize in advance for reviving an old topic t... Feb 21, 2015 - 8:02 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2026 - 12:09 AM |