 5SFE block with 3SGTE head |
 Aug 25, 2014 - 2:13 PM
|
 
|
 Enthusiast  Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%)  |
The hybrid.
So I believe that the 98+ 5SFE block is suppose to be the strongest and is a direct mate with the rev3 3SGTE Head. Apart from the water jacket needing a bit of drilling? Looking at the comparisons I cant see the difference. Does anyone know? |
 |
Replies
|
Sep 13, 2014 - 1:45 AM
|
|
|
Enthusiast Joined Aug 7, '07 From Sweden Currently Offline Reputation: 0 (0%) |
I have run 600hp and 800nm on a 88 5s block.
It's not a lot of moods you need to do. If you have a complete 3rd Gen 3s engine and a block crank from the 5s, that's what you need. A friend of my used the 5s block and the stock 3s crank and rods, with just new Pistons and run that on 600hp. If yyou have the 5s block with balanceshafts in you need to block a oil hole to that. Other then that you can use oil and water system directly from the 3s. Be sure that you use the 3s crank timing gear though the 5s gear have 1 tooth less. 3rd Gen oil system works great and I don't use oil squirters under the pistons ether -------------------- Mikael /// Sweden
St205 Co owner in www.jc-performance.se Pictures at: http://www.jc-performance.se/galleri.php?id=19 On vacation in US from 25aug-4sep in the tri state area |
Posts in this topic
yellowchinaman 5SFE block with 3SGTE head Aug 25, 2014 - 2:13 PM
Smaay unless you plan on making more than 500 HP, you do... Aug 25, 2014 - 7:58 PM
yellowchinaman QUOTE (Smaay @ Aug 25, 2014 - 8:58 P... Aug 26, 2014 - 7:38 AM Rusty Yeah he probably is planning something with his GT... Aug 25, 2014 - 11:06 PM Syaoran Using a 98+ block from a camry (it's important... Aug 26, 2014 - 11:09 AM yellowchinaman QUOTE (Syaoran @ Aug 26, 2014 - 12:0... Aug 26, 2014 - 1:45 PM Syaoran QUOTE (yellowchinaman @ Aug 26, 2014 - 2... Aug 27, 2014 - 11:44 AM yellowchinaman 4th gen 3SGTE from a caldina?
Does the forged cran... Aug 27, 2014 - 12:23 PM Smaay QUOTE (yellowchinaman @ Aug 27, 2014 - 1... Aug 27, 2014 - 6:59 PM yellowchinaman QUOTE (Smaay @ Aug 27, 2014 - 7:59 P... Aug 28, 2014 - 4:24 PM Syaoran QUOTE (yellowchinaman @ Aug 27, 2014 - 1... Aug 29, 2014 - 12:41 PM Smaay well you keep asking questions that have been answ... Aug 28, 2014 - 10:25 PM ILoveMySilly97 I can't find the post but I remember seeing it... Aug 29, 2014 - 4:53 AM yellowchinaman QUOTE (ILoveMySilly97 @ Aug 29, 2014 - 5... Aug 29, 2014 - 11:55 AM Smaay ^^^^ what he said
again, unless you plan on makin... Aug 29, 2014 - 1:31 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 7th, 2025 - 2:33 AM |