 code 54 resistors |
 Oct 31, 2014 - 4:31 PM
|
 
|
|
Enthusiast  Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%)  |
Can anyone let me know the specs of the resistors they used to clear their code 54?
Friend of mine got a brand new tweakd harness which didn't clear the cel. I used 1k ohms, 1/4 watt resistors (with the gold band) from radioshack but the code 54 was still there, even after resetting the ecu several times -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)  I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
 |
Replies
|
Nov 1, 2014 - 7:50 AM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
did you bridge the level sensor ?
-------------------- |
|
Nov 1, 2014 - 1:11 PM
|
|
|
Enthusiast Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%) |
QUOTE (Batman722 @ Nov 1, 2014 - 7:50 AM) did you bridge the level sensor ? Im assuming the tweakd harness has that bridged already. it does have a wire in the LEV spot on the connector....but no plug in the engine bay. If not, I can just ground that right? This post has been edited by Arturio55: Nov 1, 2014 - 5:16 PM -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
Posts in this topic
Arturio55 code 54 resistors Oct 31, 2014 - 4:31 PM
Malek Does the harness still have the plug for the senso... Oct 31, 2014 - 7:59 PM
Arturio55 QUOTE (Malek @ Oct 31, 2014 - 8:59 P... Oct 31, 2014 - 9:09 PM Batman722 two of these.
http://www.radioshack.com/1k-ohm-1-... Oct 31, 2014 - 9:26 PM Arturio55 QUOTE (Batman722 @ Oct 31, 2014 - 9... Nov 1, 2014 - 12:09 AM Malek ahh, gotchya.
Looks like he's got ya answer ... Oct 31, 2014 - 9:36 PM Arturio55 Soldered the wires a bit ago
The resistor on top... Nov 1, 2014 - 12:23 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 29th, 2025 - 2:22 PM |