Interior courtesy light Options

[Mumpy]

Hi
I hope someone can help me, just got my first Gen 6 GT and my Interior courtesy light doesn't work at all, whether it is switched on or not. Both filaments look serviceable and the fuses look like they are all good also. In addition to this my ciggy lighter ring doesn't illuminate. Both the lights on the doors also do not work when opened. The speedo lights work as do the heater control lights, so my thinking is that it may be the items themselves but that's a lot of bulbs to go.

Many Thanks
Mumpy

[Jeebus]

The switch in the door sill determine whether the door is open or not. When my interior light wouldn't turn on, I checked this switch. It's covered by a black rubber cover, and the screw itself is the grounding source. In my case, I unscrewed the piece, cleaned the hole to get proper grounding connection, and put it back together.

It seems unlikely that all these bulbs would suddenly stop working or burn out together especially if the fuse is fine.

This post has been edited by Jeebus: Jan 2, 2014 - 2:19 AM

[finalate]

The switch in the door sill determine whether the door is open or not. When my interior light wouldn't turn on, I checked this switch. It's covered by a black rubber cover, and the screw itself is the grounding source. In my case, I unscrewed the piece, cleaned the hole to get proper grounding connection, and put it back together.

It seems unlikely that all these bulbs would suddenly stop working or burn out together especially if the fuse is fine.

I have an st, and I took my door pannels off , and found no wiring or socket for my courtesy lights to fit into . Do these only come for the gt?